Released Data Sheet 80-36-03680 Rev 1.11 Feb 2015 TM iNAND Extreme e.MMC 5.0 with HS400 Interface 951 SanDisk Drive, Milpitas, CA 95035 2016 Western Digital Corporation or its affiliates. www.SanDisk.com Introduction 80-36-03680 SanDisk iNAND Extreme e.MMC 5.0 HS400 I/F data sheet 1.2. Plug-and-Play Integration iNANDs optimized architecture eliminates the need for complicated software integration and testing processes thereby enabling plug-and-play integration into the host system. The replacement of one iNAND device with another of a newer generation requires virtually no changes to the host. This makes iNAND the perfect solution for mobile platforms and reference designs, as it allows for the utilization of more advanced NAND Flash technology with minimal integration or qualification efforts. SanDisks iNAND Extreme is well-suited to meet the needs of small, low power, electronic devices. With JEDEC form factors measuring 11.5x13mm (153 balls) for all capacities, iNAND Extreme is fit for a wide variety of portable devices such as high-end multimedia mobile handsets, tablets, and Automotive infotainment. To support this wide range of applications, iNAND Extreme is offered with an MMC Interface. The MMC interface allows for easy integration into any design, regardless of the host (chipset) type used. All device and interface configuration data (such as maximum frequency and device identification) are stored on the device. Figure 1 shows a block diagram of the SanDisk iNAND Extreme with MMC Interface. SanDisk iNAND MMC Bus Flash Interface Data In/Out Memory Single Chip controller Control Figure 1 - SanDisk iNAND Extreme with MMC Interface Block Diagram 1.3. Feature Overview SanDisk iNAND Extreme, with MMC interface, features include the following: Memory controller and NAND flash Mechanical design complies with JEDED Specification 2 Offered in three TFBGA packages of e.MMC 5.0 o 11.5mm x 13mm x 1.0mm (16GB, 32GB, 64GB) Operating temperature range: 25C to +85C 2 Refer to JEDEC Standards No. JESD84-B50 2016 Western Digital Corporation or its affiliates. 80-36-03680 6