FN7561-200-M10 Schaffner

DATASHEET Capacitors FN 756X DC Feedthrough Capacitor EN/IEC 60384-14 approval Approvals & Compliances Rated currents from 10 to 200 A 2.5 kV pulse test capability Class Y4 capacitor Feedthrough capacitors offer a high insertion loss across a broad band of frequencies from a few tens of kHz up to the GHz region. The construction of feedthrough capacitors cause a better suppression performance over a much wider frequency range than a conventional two-wire capacitor of equivalent value. Different versions are available offering a wide Technical specifications selection on operating currents and performance levels. DC feedthrough capacitors are designed and approved for 130 VDC/130 VAC 50/60 Hz operation. Maximum continuous operating voltage 130 DC (UL, ENEC) 130 VAC, 50/60 Hz (UL, ENEC) 650 VDC max. Features and benefits Rated currents 10 to 200 A 60C max. Very low internal series inductance Capacitor class Y4 High potential test voltage 1700 VDC for 2 sec Very high self-resonant frequency Insulation resistance (100VDC after 60 sec) <0.33 F, R >1500 M Self-healing dielectric >0.33 F, >5000 s High quality and reliability Temperature range (operation and storage) -40C to +100C (40/100/21) Through-bulkhead mounting Flammability corresponding to UL 94 V-2 or better Anti-twist protection MTBF 60C/130 V (Mil-HB-217F) <200 A: >1,400,000 hours 200 A: >450,000 hours Custom-specific or dual-versions on request Typical applications Power line filter for 48 VDC battery power Increasing system and information security Telecom base stations Switching and cellular equipment Computer servers UPS power supplies Medical equipment Typical electrical schematic2 EMC/EMI Products Schaffner Group Datasheets 19 Jun 2019 Feedthrough selector table Feedthrough Rated current Leakage current* Capacitance** DC resistance*** Weight 60C 130 VAC/50 Hz C R 25C A mA nF m g FN 7560-10-M3 10 0.49 10 0.8 15 FN 7562-16-M4 16 4.9 100 0.62 34 FN 7563-16-M4 16 23 470 0.63 78 FN 7562-32-M4 32 4.9 100 0.62 34 FN 7563-32-M4 32 23 470 0.63 79 FN 7560-63-M6 63 0.49 10 0.3 70 FN 7561-63-M6 63 2.3 47 0.3 70 FN 7562-63-M6 63 4.9 100 0.3 70 FN 7563-63-M6 63 23 470 0.43 103 FN 7560-100-M8 100 2.3 47 0.23 145 FN 7561-100-M8 100 4.9 100 0.23 145 FN 7562-100-M8 100 23 470 0.23 145 FN 7563-100-M8 100 49 1000 0.25 192 FN 7560-200-M10 200 4.9 100 0.16 160 FN 7561-200-M10 200 23 470 0.16 160 FN 7562-200-M10 200 49 1000 0.18 268 FN 7563-200-M10 200 230 4700 0.14 490 *** Tolerance +20% *** Tolerance 20% *** Tolerance +15% Typical filter attenuation Full load, 50 system 10 A types 16 A types 32 A types 63 A types 100 A types 200 A types