199 Power Relays GENERAL SPECIFICATIONS www.serelays.com File No. E43641 IEC 60947-1 168986 File No. E43641 DPDT SPDT SPST-DM 199AX, 199X, 199AMX, 199ADX, 199DX, 199ADE, 199DE, ,4 ,4 PART NUMBERS 199MX, 199ABX, 199ADYX, 199DYX, 199P , 199AP 199ADBE, 199DBE 199BX 199ADBX, 199DBX CONTACT CHARACTERISTICS Number and type of contacts SPST, SPDT, DPST, DPDT SPST-DM, SPST-DB DPDT, SPDT SPST-DM Contact material AgSnO Thermal (carrying) current rating 40 A 50 A Maximum switching voltage 600 V(rms) Rated Switching current at Resistive 40 A at 300 VAC 40 A at 300 VAC 50 A at 300 VAC 50 A at 300 VAC voltage 5 A at 480 VAC 12 A at 480 VAC 5 A at 480 VAC 12 A at 480 VAC 5 A at 600 VAC 10 A at 600 VAC 5 A at 600 VAC 10 A at 600 VAC 40 A at 28 VDC 40 A at 28 VDC 50 A at 28 VDC 50 A at 28 VDC Motor 2 HP at 120 to 600 VAC Tungsten 15 A at 120 VAC Pilot duty A600 Minimum switching requirement 1 A at 5 VAC/VDC COIL CHARACTERISTICS Voltage range 6 to 600 VAC 6 to 250 VDC 5 Operating range (% of Nominal) 85% to 110% (AC) 80% to 110% (DC) Average power consumption (Maximum) 10 VA 4 W Drop-out voltage threshold 10% (AC/DC) PERFORMANCE CHARACTERISTICS Electrical life (IEC 60947-1) Rated resistive load Please refer to Table 3 Operating time (response time) 30 ms Dielectric strength Between coil and 2200 V 2200 V 2200 V 2200 V contact Between poles 2200 V N/A 2200 V N/A Between open contacts 1600 V 2200 V 1600 V 2200 V ENVIRONMENT Product certications UL, CSA, CE, RoHS Ambient temperature range (around the device) -55 to +100 C (Storage) -55 to +55 C (Operation) Termination 10 (5.3) AWG (mm) Terminal tightening torque 11 to 15 in-lb (1.2 to 1.7 Nm) Weight 227 to 312 g (8 to 11 oz) For auxiliary switch ratings, please refer to Table 1. For ratings with blowout magnet, please refer to Table 2. For UL listed installations, proper wire rating and terminations required. 4 Recommended ring, fork, or box wire termination. 5 Recommended mounting positions: horizontal or vertical (not upside down). Document No. 600SP02-0710 2010 Schneider Electric USA. Power R ela y sTable 1: Auxiliary Switch Ratings Table 2: Additional DC Ratings with Blowout Magnets AUXILIARY SWITCH RATINGS RELAY VOLTAGE RATING W/BLOWOUT MAGNET Resistive Load 120/250 VAC (50/60 Hz) 10 A 110 VDC 20 A www.serelays.com Motor Load 125/250 VAC (50/60 Hz) 0.25 HP 220 VDC 8 A Tungsten Load 125 VAC (50/60 Hz) 3 A 325 VDC 4 A 500 VDC 2 A Table 3: Contact Ratings & Electrical Endurance (per IEC 60947-1, 60947-4-1) CURRENT/HORSEPOWER ESTIMATED ELECTRICAL Notes: LOAD VOLTAGE FREQUENCY LOAD TYPE SEE NOTE(S) RATINGS ENDURANCE 1. 50 A rating refer to models with pressure wire connectors only. AC LOAD 2. Resistive AC load ratings are based on a power 50 A 300 V 50/60 Hz Resistive 25,000 cycles 1, 4 factor of 0.85 to 1.0. 40 A 50,000 cycles 2, 4 3. Motor horsepower ratings are based on a power 2 HP 120 to 600 V Motor 50,000 cycles 3, 4 factor of 0.4 to 0.5, and an initial inrush current not 15 A 120 V Tungsten 20,000 cycles 4, 5 in excess of six times the full load current. A600 --- --- Pilot Duty 100,000 cycles 4 4. All ratings are based on applying the rated nominal DC LOAD power to the relay coil in such a manner as to provide a clean make and break, and does not 40 A 28 V DC Resistive 100,000 cycles 4 result in any contact chatter or multiple actuation 20 A 110 V of the contacts. 8 A 220 V 5. The tungsten rating is based on cold lament 4 A 325 V inrush current not exceeding 15 times the rated 2 A 500 V steady state lamp current. RELAY DIMENSIONS RELAY WIRING DIAGRAMS shown in inches (millimeters) 14 A1 24 A121 SPDT Short base w/Auxiliary Switch 22 DPST-NO 12 14 A211 12 A2 11 2.06 1.95 (52.4) (49.6) SPDT DPDT 14 A1 22 A121 1.874 0.81 0.19 1.874 0.374 0.31 (47.60) (20.7) (4.8) 2.5 2.49 1.15 2.49 (47.60) 2.5 (9.50) (8.0) (63.6) (63.2) (29.3) (63.2) (63.6) 13 A2 12 A211 DPDT Long base w/Auxiliary Switch SPST-NO-DM SPST-NO-DM 12 A1 24 A121 2.31 1.98 (58.8) (50.3) 13 A2 14 A211 DPST-NO 1.874 1.874 0.19 0.374 (47.60) 2.5 (47.60) 3.13 (4.8) 1.15 2.56 2.5 (9.50) (65.0) (63.6) (79.4) (29.3) (63.6) Document No. 600SP02-0710 2010 Schneider Electric USA. Power R elay s