Product data sheet ATS22D47Q Characteristics soft starter-ATS22-control 220V-power 230V(11kW)/400...440V(22kW) Product availability: Non-Stock - Not normally stocked in distribution facility Main Range of product Altistart 22 Product or component Soft starter type Product destination Asynchronous motors Product specific applica- Pumps and fans tion Component name ATS22 Phase 3 phases Us rated supply volt- 230...440 V - 15...10 % age Motor power kW 11 kW 230 V 22 kW 400 V 22 kW 440 V Factory setting current 42 A Power dissipation in W 48 W for standard applications Utilisation category AC-53A Type of start Start with torque control (current limited to 3.5 In) IcL starter rating 47 A connection in the motor supply line for standard applications IP degree of protection IP20 Complementary Assembly style With heat sink Function available Internal bypass Supply voltage limits 195...484 V Supply frequency 50...60 Hz - 10...10 % Network frequency 45...66 Hz Device connection In the motor supply line To the motor delta terminals Uc control circuit voltage 230 V -15...10 % 50/60 Hz Control circuit consumption 20 W Discrete output number 2 Discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Minimum switching current 100 mA 12 V DC relay outputs Maximum switching current 5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs Discrete input number 3 Discrete input type Logic LI1, LI2, LI3 5 mA 4.3 kOhm Discrete input voltage 24 V <= 30 V Discrete input logic Positive logic LI1, LI2, LI3 < 5 V and <= 2 mA > 11 V >= 5 mA Output current 0.4...1 Icl adjustable PTC probe input 750 Ohm Communication port protocol Modbus Connector type 1 RJ45 Aug 9, 2019 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Communication data link Serial Physical interface RS485 multidrop Transmission rate 4800, 9600 or 19200 bps Installed device 31 Protection type Phase failure line Thermal protection starter Thermal protection motor Marking CE Type of cooling Forced convection Operating position Vertical +/- 10 degree Height 10.43 in (265 mm) Width 5.12 in (130 mm) Depth 6.65 in (169 mm) Product weight 15.43 lb(US) (7 kg) Motor power range AC-3 7...11 kW at 200...240 V 3 phases 15...25 kW at 380...440 V 3 phases Motor starter type Soft starter Environment Electromagnetic compatibility Conducted and radiated emissions level A IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/current impulse level 3 IEC 61000-4-5 Standards EN/IEC 60947-4-2 Product certifications GOST CCC CSA C-Tick UL Vibration resistance 1.5 mm 2...13 Hz EN/IEC 60068-2-6 1 gn 13...200 Hz EN/IEC 60068-2-6 Shock resistance 15 gn 11 ms EN/IEC 60068-2-27 Noise level 45 dB Pollution degree Level 2 IEC 60664-1 Relative humidity 0...95 % without condensation or dripping water EN/IEC 60068-2-3 Ambient air temperature for operation 14...104 F (-10...40 C) without derating > 104...< 140 F (> 40...< 60 C) with current derating 2.2 % per C Ambient air temperature for storage -13...158 F (-25...70 C) Operating altitude <= 3280.84 ft (1000 m) without derating > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m Ordering and shipping details Category 22576 - ATS22 ALTISTART Discount Schedule CP1G GTIN 003606480167201 Nbr. of units in pkg. 1 Package weight(Lbs) 12.1 Returnability N Country of origin ID Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 0938 - Schneider Electric declaration of conformity Schnei- der Electric declaration of conformity REACh Reference not containing SVHC above the threshold Product environmental profile Available Product end of life instructions Available 2