XMLPM15RP23F Schneider

Product data sheet XMLPM15RP23F Characteristics pressure transmitter -14,5..15psi - 4..20mA - 1/4-18NPT male - FPM - packard Main Range of product OsiSense XM Product or component Electronic pressure sensors type Pressure sensor type Pressure transmitter Pressure sensor name XMLP Electrical circuit type Control circuit Pressure sensor size -14.5...15 psi Local display Without Controlled fluid Hydraulic oil -15...125 C Gas -15...125 C Air -15...125 C Fresh water 0...125 C Fluid connection type 1/4 - 18 NPT (male) Electrical connection 1 male connector Packard Metripack 150 3 pins Us rated supply volt- 12...24 V DC SELV, voltage limits: 7...33 V age Current consumption < 23 mA Type of output signal Analogue Analogue output func- 4...20 mA, 2-wire tion Quantity per set Set of 1 Type of packing Individual Complementary Pressure setting range -14.5...15 psi Maximum permissible accidental pressure 44 psi Destruction pressure 73 psi Materials in contact with fluid Ceramic Stainless steel AISI 316L Fluorocarbon FPM Operating position Any position Protection type Load short-circuit Reverse polarity Electromagnetic compatibility Electrical fast transient/burst immunity test conforming to EN/IEC 61000-4-4 - test level 4 kV Immunity to magnetic fields conforming to EN/IEC 61000-4-8 - test level 100 A/m (f = 50 Hz) 1.2/50 s shock waves immunity test conforming to EN/IEC 61000-4-5 - test level 1 kV (f = 42 Ohm) Electrostatic discharge immunity test conforming to EN/IEC 61000-4-2 - test level 8 kV air, 4 kV contact Radiated RF fields conforming to EN/IEC 61000-4-6 - test level 10 V (f = 0.15...80 MHz) Susceptibility to electromagnetic fields conforming to EN/IEC 61000-4-3 - test lev- el 10 V/m (f = 80...1000 MHz) Uimp rated impulse withstand voltage 0.5 kV Response time on output <= 2 ms for 92 % of full scale Drift of the sensitivity +/- 0.02 % of measuring range/K Drift of the zero point +/- 0.02 % of measuring range/K Measurement accuracy +/- 0.5 % of the measuring range Repeat accuracy +/- 0.1 % of the measuring range Mechanical durability >= 10000000 cycles Product weight 0.076 kg Jul 21, 2016 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.Diameter 26 mm Length 49.2 mm Environment Standards EN/IEC 61326-2-3 NSF ANSI 61 Product certifications CE CULus RCM EAC Ambient air temperature for operation -30...85 C Ambient air temperature for storage -50...100 C Vibration resistance 20 gn (f = 10...2000 Hz) conforming to EN/IEC 60068-2-6 Shock resistance 100 gn for 11 ms conforming to EN/IEC 60068-2-27 IP degree of protection IP65 conforming to EN/IEC 60529 2