SA-027WQ 7-Day Timer Manual Automate the following: Lighting Systems Access Controls Security Systems Environmental Controls 12~24 VAC/VDC 16 Schedules including daily, weekly, weekends, etc. Program up to 60 flexible events Holiday function (up to 99 days) Memory saved if power fails Easy-to-read backlit LCD Backup battery included* Covered terminal blocks Adjustable output time Form C relay output Programmable security code (10A 120VAC/298VDC) lock out 12 or 24 hr clock format Egress input terminal *Preserves clock time only. External power must be present for relay to function. ENFORCER 7-Day Timer Table of Contents: Overview ................................................................ 2 Setting the Time .................................................... 4 Specifications ......................................................... 2 Entering Events .................................................. 4-6 Dimensions ............................................................ 2 Setting Holiday Mode ............................................ 6 Installation .............................................................. 3 Sample Applications/Wire Diagram ...................... 7 Setting the Security Code ..................................... 3 Troubleshooting .................................................... 8 Operating Modes ................................................... 4 Also Available from SECO-LARM ......................... 8 Power Indicator LED ENTER See Programming section for details Overview: Glows blue when power is ON. Enter setting / Confirm setting / Relay Indicator LED Move to next setting. Glows red when relay is active. DOWN See Programming section for details MODE Move to previous setting / Decrease Enter mode selection selected setting. Toggle Automatic (relay will follow UP See Programming section for details programs) / Manual (relay will not Move to next setting / Increase (+) Power Input follow programs) selected setting. 12~24 VAC/VDC () Hold 3-sec: Relay will exit LCD Display N.C. mode selection See detailed description below. COM Relay Output RESET Terminal block N.O. Press once: Turn relay OFF, return to For connection details, see Sample N.O. N.O. automatic mode (see 3 above) Applications/Wire Diagram on GND Egress Input Hold 3-sec: Reset to factory defaults page 7. SET See Programming section for details Enter settings mode / Move to previous setting. LCD Display: SU-SA Day of the week CODE Security code setting HOLI Holiday mode setting TIME Time setting ON Relay is ON PROG Event program setting OFF Relay is OFF Indicates time (hours:minutes) NOTE: If both ON & OFF show, event is AM / PM Indicates when set in 12-hr clock format programmed to Pulse mode. Event Shows which event is active, or F/P for relay output mode Specifications: Operating voltage 12~24 VAC/VDC Standby 15mA 12VDC Current draw Active 70mA 12VDC Relay rating 10A 120VAC/28VDC Backup battery 1 x CR-2016 (included) Weight 4.6-oz (130g) 3 1 1 Dimensions 4 / x 3 / x 1 / (107 x 78 x 31 mm) 16 16 4 Dimensions: 3 4 / 16 (107mm) 9 4 /16 (116mm) 1 1 3 /16 1 / 4 (78mm) (31mm) 2 SECO-LARM U.S.A., Inc