SS-040Q Mini Shock/Vibration Detector Manual Features: For use in closed-circuit alarm systems Built-in tamper switch provides enhanced security Pure silver contacts with gold plating to ensure reliable and long-term operation Adjustable contact pressure for different surfaces Ideal for protecting glass windows, showcases, solid walls, ceilings, safes, Detects a vibration/shock on protected cabinets, motorcycles, skylights, etc. surface and activates an alarm Small size for discreet installation ENFORCER Mini Shock/Vibration Detector Introduction: The ENFORCER SS-040Q MINI SHOCK/VIBRATION DETECTOR is designed for protection against forced entry by a hammer, saw, crowbar, etc. through walls, ceilings, windows, safes, cabinets, etc. For use in closed-circuit alarm systems, the SS-040Q will initiate an alarm when a vibration of considerable force strikes the protected surface. A built-in tamper switch is independently wired from the vibration detector for enhanced security. Vibration contacts are adjustable by turning an adjustment screw to respond on any surface glass, wood, steel, plasterboard, or brick. Pure silver contacts with gold plating ensure years of long-term operation. Its dust-tight ABS case is small and can be easily mounted inside with double-sided adhesive tape. Specifications: Circuit type N.C., momentarily open when activated Contact pressure Adjustable from 1 to 50 grams but recommended setting between 5 and 25 grams only. Supplied with pressure of approx. 6 grams Current rating 1A 50VDC Break time Approx. 45 ms max. (at 6-gram pressure) Estimated life Over 100,000 cycles Contact Silver with gold plating Case ABS resin Operating temperature -40~167 F (-40~75 C) 3 13 5 Dimensions 2 /8 x /16 x /8 (60x21x15mm) Weight 0.7-oz. (20 g) Installation and Operation: 1. Remove the cover and connect one lead of the wire from the N.C. input of the alarm to the terminal of the SS-040Q near the opening. Connect the other lead to the terminal of the tamper switch, as shown below. Tamper switch Closed loop input The SS-040Q will trigger the alarm whenever it is vibrated, shaken, or its cover is removed 2. If you choose not to use the tamper switch, fasten the wire to the terminal farther from the opening, as shown below. To alarm unit Closed loop input The SS-040Q will trigger the alarm only when it is vibrated or shaken. NOTE: When protecting windows, the preferred installation method is to mount the SS-040Q on the frame of the window rather than directly on the glass. This reduces the chance of false alarms resulting from heavy vehicles passing by or from pedestrians inadvertently tapping on the window. 2 SECO-LARM U.S.A., Inc.