uClamp0506A TM Clamp 5-Line ESD protection Array TM PROTECTION PRODUCTS - MicroClampPROTECTION PRODUCTS Features Description TM The Clamp series of TVS arrays are designed to pro- Transient protection for data lines to tect sensitive electronics from damage or latch-up due IEC 61000-4-2 (ESD) 15kV (air), 8kV (contact) to ESD. They are designed for use in applications where IEC 61000-4-4 (EFT) 40A (5/50ns) board space is at a premium. Each device requires less Protects five bidirectional I/O lines 2 than 2.9mm of PCB area and will protect up to five lines. Ultra-small SC-89 package (1.7 x 1.7 x 0.6mm1.7 x 1.7 x 0.6mm1.7 x 1.7 x 0.6mm)1.7 x 1.7 x 0.6mm1.7 x 1.7 x 0.6mm They are bidirectional devices and may be used on lines 2 requires less than 2.9mm of PCB area where the signal polarities swing above and below ground. Working voltage: 5V TVS diodes are solid-state devices designed specifically Low leakage current for transient suppression. They feature large cross-sec- Low operating and clamping voltages tional area junctions for conducting high transient cur- Solid-state silicon-avalanche technology rents. They offer desirable characteristics for board level protection including fast response time, low operating Mechanical Characteristics and clamping voltage, and no device degradation. SC-89 (SOT-666) package These devices may be used to meet the immunity re- RoHS / WEEE Compliant quirements of IEC 61000-4-2, level 4. The small SC89 Molding compound flammability rating: UL 94V-0 package makes them ideal for use in portable electron- Marking : Marking Code and pin 1 indicator ics such as cell phones, PDAs, notebook computers, and Weight: 2.9mg (typical) digital cameras. Packaging : Tape and Reel per EIA 481 Applications Cellular Handsets and Accessories Cordless Phones Notebooks and Handhelds Portable Instrumentation Digital Cameras Peripherals MP3 Players Dimensions Schematic & PIN Configuration 1.70 0.50 1.25 1.70 0.30 0.60 Maximum Dimensions (mm) SC-89 (Top View) www.semtech.com Revision 03/21/07 1uClamp0506A PROTECTION PRODUCTS Absolute Maximum Rating Rlating Seymbo Vsalu Unit PPeak Pulse Power (tp = 8/20s) 1s00 Watt pk M)aximum Peak Pulse Current (tIp = 8/20s 7sAmp pp ESD per IEC 61000-4-2 (Air) V +/- 20 kV PP ESD per IEC 61000-4-2 (Contact) +/- 12 LTead Soldering Temperature 2C60 (10 sec.) L OTperating Temperature -C55 to +125 J STtorage Temperature -C55 to +150 STG o Electrical Characteristics (T=25 C) Plarameter SsymboCmondition MlinimuTmypicaMsaximu Unit RVeverse Stand-Off Voltage 5V RWM RVeverse Breakdown Voltage I=61mA 79.8 V BR t RIeverse Leakage Current V=05V, T=25C 01.10 A R RWM RIeverse Leakage Current V=03V, T=25C 00.05 0A.50 R RWM CVlamping Voltage I = 1A, t=98/20s V C PP p CVlamping Voltage I = 7A, t=28/20s 1V C PP p JCunction Capacitance Between I/O Pins and 300 4Fp j Gnd V = 0V, f = 1MHz R www.semtech.com 2007 Semtech Corp. 2