DPA6111 Sensata

PCB Mount DataSheet DPA Series 16 Pin DIP SSR Ratings to 1 A 280 VAC SCR output Voltage or current-control input Zero-crossing (resistive loads) output PRODUCT SELECTION Control Voltage 120V 240V 3-32 VDC DPA4119 DPA6119 10-35 mA DPA4111 DPA6111 AVAILABLE OPTIONS Operating Voltage 41: 20-140 VAC 61: 20-280 VAC Series 19 DPA 41 Control Range Required for valid part number 11: 10-35mA DC For options only and not required for valid part number 19: 3.5-10 VDC (1) OUTPUT SPECIFICATIONS Description DPA41xx DPA61xx Operating Voltage (47-63Hz) Vrms 20-140 20-280 Transient Overvoltage Vpk 400 600 Maximum Off-State Leakage Current Rated Voltage mArms 0.01 0.01 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (3) 500 500 Maximum Load Current Arms 1.0 1.0 Minimum Load Current Arms 0.025 0.025 Maximum Surge Current (16.6ms) Apk 30 30 Maximum On-State Voltage Drop Rated Current Vpk 1.2 1.2 Minimum Power Factor (with Maximum Load) 0.5 0.5 (1) INPUT SPECIFICATIONS Description DPAxx11 DPAxx19 Control Voltage Range - 3.5-10 VDC Control Current Range 10-35 mA - Must Turn Off-State Current 1.0 mA - Must Turn Off-State Voltage - 1.0 VDC Typical Input Current 5 VDC - 15 mAdc Nominal Input Impedance - 270 Ohm Maximum Turn-On Time msec 1/2 Cycle 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle 1/2 Cycle Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.PCB Mount DataSheet GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) (2) 3750 Vrms 9 Minimum Insulation Resistance ( 500 VDC) (2) 10 Ohm 2.0 pF Maximum Capacitance, Input/Output -30 to 80C Ambient Operating Temperature Range -30 to 125C Ambient Storage Temperature Range 0.1 oz. (2.9g) Weight (typical) Encapsulation Thermally Conductive Epoxy GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Dielectric and insulation resistance are measured between input and output (3) Off-State dv/dt test method per EIA/NARM standard RS MECHANICAL SPECIFICATIONS WIRING DIAGRAM Tolerances: 0.02 in / 0.5 mm All dimensions are in: inches millimeters PIN 8: AC LOAD 16 10 PIN 10: AC LOAD PIN 16: +DC CONTROL + PIN 1: -DC CONTROL AC INPUT OUTPUT AC - 1 8 THERMAL DERATE INFORMATION 1.0 0.75 0.5 0.25 0 20 40 60 80 Ambient Temperature (C) Max. Load Current vs. Temp. AGENCY APPROVALS AGENCY APPROVALS UL E116950 CSA LR81689 Rev. 120210 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amps)