HS201DR-CC2425W3U Sensata

DIN Rail Mount DataSheet HS201DR Series 35 & 38 amp AC output 40C Dual Channel output 4 to 32 VDC input control voltage DIN Rail mounted UL, cUL, CE approved SSRss PRODUCT SELECTION Description 35A 38A 4-32 VDC Control HS201DR-CC2425W3U HS201DR-CD4850W4U (1) OUTPUT SPECIFICATIONS Description HS201DR-CC2425W3U HS201DR-CD4850W4U Operating Voltage (47-63Hz) Vrms 24-280 48-660 Transient Overvoltage Vpk 600 1200 Maximum Off-State Leakage Current Rated Voltage mArms 0.1 .25 Minimum Off-State dv/dt Maximum Rated Voltage V/sec (2) 500 500 Maximum Load Current Arms 35 38 Minimum Load Current Arms .15 .15 Maximum 1 Cycle Surge Current (50/60 Hz) Apk 275/300 710/750 Maximum On-State Voltage Drop Rated Current Vpk 1.3 1.7 Maximum It for fusing (50/60 Hz, 1/2 cycle) A sec 380/370 2520/2320 Minimum Power Factor (with Maximum Load) 0.5 0.5 (1) INPUT SPECIFICATIONS Description Parameters Control Voltage Range 4-32 VDC Minimum Turn-On Voltage 4.0 VDC Minimum Turn-Off Voltage 1.0 VDC Maximum Reverse Voltage 32 VDC Typical Input Current 10 mA 12 VDC Nominal Input Impeadance (3) Maximum Turn-On Time msec 1/2 Cycle Maximum Turn-Off Time msec 1/2 Cycle GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms 9 Minimum Insulation Resistance ( 500 V DC) 10 Ohms Maximum Capacitance, Input/Output 10 pF Ambient Operating Temperature Range -40 to 80C Ambient Storage Temperature Range -40 to 125C Status Indicator Display Yes Weight (typical) 1.03 lb (453g) Encapsulation Themally Conductive Epoxy Load Terminals Screw Torque Range 18-20 in/lbs (2.0-2.26 Nm) Thermal pad installed Yes GENERAL NOTES (1) All parameters at 25C unless otherwise specied. (2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 (3) Input circuitry for DC control version incorporates active current limiter. NOTE: For more information see Evolution Dual spec sheet. Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice.DIN Rail Mount DataSheet MECHANICAL SPECIFICATIONS 2X 0.18 4.5 3.82 97.0 1.61 41.0 1.03 26.2 1.77 45.0 1.88 47.7 2X 6-32 UNC-2B 3.52 89.4 TAP .26 3.19 81.0 4.84 122.7 3.41 3.15 80.0 86.5 THERMAL DERATE INFORMATION HS201DR w/25 or 50A Evolution Dual 40 35 30 50A Dual 25A Dual 25 20 15 10 5 0 20 30 40 50 60 70 80 Ambient Temperature (C) AGENCY APPROVALS Agency Approvals Designed in accordance with the requirements of IEC 62314 Agency approvals are for relay only. E116950 Rev. 110911 Do not forget to visit us at: www.crydom.com Copyright 2017 Crydom Inc. Specifications subject to change without notice. Load Current (Amps)