SCX15AN Sensym

Microstructure Pressure Sensors Compensated 0 psi to 1psi up to 0 psi to 150 psi SCX Series FEATURES Precision Temperature Compensation Calibrated Zero & Span Small Size Low Noise Low Cost (SCX NC) High Accuracy (SCX N) High Impedance for Low Power Applications TYPICAL APPLICATIONS Medical Equipment The SCX series sensors provide a very cost-effective solution for pressure Barometry applications that require operation over wide temperature range. These Computer Peripherals internally calibrated and temperature compensated sensors were specifically Pneumatic Controls designed to provide an accurate and stable output over a 0 C to 70 C HVAC 32 F to 158 F temperature range. This series is intended for use with non- corrosive, non-ionic working fluids such as air, dry gases and the like. ELECTRICAL CONNECTION Devices are available to measure absolute, differential and gage pressures from 1 psi (SCX01) up to 150 psi (SCX150). The Absolute (A in model number) devices have an internal vacuum reference and an output voltage proportional to absolute pressure. The Differential (D in model number) devices allow application of pressure to either side of the pressure-sensing diaphragm and can be used for gage or differential measurements. The SCX series devices feature an integrated circuit (IC) sensor element and laser trimmed thick film ceramic housed in a compact solvent resistant case. This package provides excellent corrosion resistance and provides isolation to external packaging stresses. The package has convenient PIN 1) TEMPERATURE OUTPUT (+) mounting holes and pressure ports for ease of use with standard plastic PIN 2) Vs tubing for pressure connection. PIN 3) + OUTPUT PIN 4) GROUND If the application requires extended temperature range operation, beyond PIN 5) - OUTPUT 0 C to 70 C 32 F to 158 F , two pins which provide an output voltage PIN 6) TEMPERATURE OUTPUT (-) proportional to temperature are available for use with external circuitry. The Note: The polarity indicated is for 100 microsecond response time makes this series an excellent choice for pressure applied to port B. (For computer peripherals and pneumatic control applications. absolute devices pressure is applied to port A and the output polarity is The output of the bridge is ratio metric to the supply voltage. Operation from reversed) any dc supply voltage up to 20 Vdc is acceptable. WARNING Contact your local honeywell representative, or go to Honeywells website at www.honeywell.com/sensing for additional details. PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or WARNING in any other application where failure of the product MISUSE OF DOCUMENTATION could result in personal The information presented in this product sheet is for reference only. Do not injury. use this document as a product installation guide. Failure to comply with Complete installation, operation, and maintenance information is provided in these instructions could the instructions supplied with each product. result in death or serious Failure to comply with these instructions could result in death or serious injury. injury. Sensing and Control Microstructure Pressure Sensors Compensated 0 psi to 1psi up to 0 psi to 150 psi SCX Series PRESSURE RANGE SPECIFICATIONS (1) Full-Scale Span Operating Proof Model * Sensitivity Min. Typ. Max. (2) Pressure Pressure SCX01DN 17.82 mV 18.00 mV 18.18 mV 0 psid to 1 psid 20 psid 18 mV/psi SCX01DNC 17.00 mV 18.00 mV 19.00 mV SCX05DN 59.40 mV 60.00 mV 60.60 mV 0 psid to 5 psid 20 psid 12 mV/psi SCX05DNC 57.50 mV 60.00 mV 62.50 mV SCX15AN 89.10 mV 90.00 mV 90.90 mV 0 psid to 15 psia 30 psia 6.0 mV/psi SCX15ANC 85.00 mV 90.00 mV 95.00 mV SCX15DN 89.10 mV 90.00 mV 90.90 mV 0 psid to 15 psid 30 psid 6.0 mV/psi SCX15DNC 85.00 mV 90.00 mV 95.00 mV SCX30AN 89.10 mV 90.00 mV 90.90 mV 0 psid to 30 psia 60 psia 3.0 mV/psi SCX30ANC 85.00 mV 90.00 mV 95.00 mV SCX30DN 89.10 mV 90.00 mV 90.90 mV 0 psid to 30 psid 60 psid 3.0 mV/psi SCX30DNC 85.00 mV 90.00 mV 95.00 mV SCX100AN 99.00 mV 100.0 mV 101.0 mV 0 psid to 100 psia 150 psia 1.0 mV/psi SCX100ANC 95.00 mV 100.0 mV 105.0 mV SCX100DN 99.00 mV 100.0 mV 101.0 mV 0 psid to 100 psid 150 psid 1.0 mV/psi SCX100DNC 95.00 mV 100.0 mV 105.0 mV SCX150AN 89.00 mV 90.00 mV 91.00 mV 0 psid to 150 psia 150 psia 0.6 mV/psi SCX150ANC 85.00 mV 90.00 mV 95.00 mV SCX150DN 89.00 mV 90.00 mV 91.00 mV 0 psid to 150 psid 150 psid 0.6 mV/psi SCX150DNC 85.00 mV 90.00 mV 95.00 mV * Ordering information: Order model number. GENERAL SPECIFICATIONS Characteristic Description (Maximum Ratings) All Devices Supply Voltage (VS) 20 Vdc Common Mode Pressure 50 psig Lead Soldering Temperature 250 C 482 F (2 seconds to 4 seconds) ENVIRONMENTAL SPECIFICATIONS Characteristic Description (Maximum Ratings) All Devices Compensated Operating Temperature 0 C to 70 C 32 F to 158 F Operating Temperature -40 C to 85 C -40 F to 185 F Storage Temperature -55 C to 125 C -67 F to 257 F Humidity Limits 0 % RH to 100 % RH ACCURACY Model Accuracy SCX01 through SCX150 Calibrated for span to within 1 % (Highest accuracy) SCX01 C through SCX150 C Calibrated for span to within 5 % (Fine adjustments of zero and span can be provided in external circuitry) 2 Honeywell Sensing and Control