Microstructure Pressure Sensors Low Cost, Compensated, DIP Package SDX Series 0 psi to 1 psi up to 0 psi to 100 psi FEATURES Low Cost DIP Precision Temperature Compensation Calibrated Zero & Span Small Size Low Noise High Impedance for Low Power Applications Prime Grade Available (SDXxxxyy-A) The SDX series sensors provide a very cost effective solution for pressure TYPICAL APPLICATIONS applications that require small size plus performance. These calibrated and Medical Equipment temperature compensated sensors give an accurate and stable output over Computer Peripherals a 0 C to 50 C 32 F to 122 F temperature range. This series is intended Pneumatic Controls for use with non-corrosive, non-ionic working fluids such as air, dry gases HVAC and the like. Devices are available to measure absolute and gage pressures from 1 psi (SDX01) up to 100 psi (SDX100). The absolute devices have an internal vacuum reference and an output voltage proportional to absolute pressure. The SDX devices are available in standard commercial and prime grades (SDCxxxyy A) to allow optimization of accuracy and cost in any given application. The SDX devices feature an integrated circuit (IC) sensor element and laser trimmed thick film ceramic housed in a compact solvent resistant case. The package is a double-wide (i.e. 0.600 inches lead spacing) dual-inline package (DIP). This is the same familiar package used by IC manufacturers except it is only 11,94 mm 0.470 in long and has a pressure port(s). The pc 2 board area used by each DIP is approximately 0.26 in . This extremely small size enables the use of multiple sensors in limited available space. The DIP provides excellent corrosion resistance and isolation to external package stress. The DIP mounts on a pc board like a standard IC with through-hole pins. The pins anchor the pressure sensor to the pc board and provide a more secure and stable unit than other types of packages. The output of the bridge is ratiometric to the supply voltage and operation from any dc supply voltage up to 20 Vdc is acceptable. WARNING Contact your local honeywell representative or go to Honeywells website at PERSONAL INJURY www.honeywell.com/sensing for additional details. DO NOT USE these products as safety or emergency stop devices or WARNING in any other application MISUSE OF DOCUMENTATION where failure of the product could result in personal The information presented in this product sheet is for reference only. Do not injury. use this document as a product installation guide. Failure to comply with Complete installation, operation, and maintenance information is provided in these instructions could the instructions supplied with each product. result in death or serious Failure to comply with these instructions could result in death or serious injury. injury. Sensing and Control Microstructure Pressure Sensors Low Cost, Compensated, DIP Package SDX Series 0 psi to 1 psi up to 0 psi to 100 psi PRESSURE RANGE SPECIFICATIONS Model No*, Pressure Connection, (1) Proof Full-Scale Span Operating Pressure Type (2) Pressure Pressure Min. Typ. Max. Gage Diff/Gage Absolute SDX01G2 SDX01D4 -- 17.37 mV 18.00 mV 18.63 mV 0 psid to 1 psid 20 psid SDX01G2-A SDX01D4-A -- 17.82 mV 18.00 mV 18.80 mV SDX05G2 SDX05D4 -- 57.90 mV 60.00 mV 62.10 mV 0 psid to 5 psid 20 psid SDX05G2-A SDX05D4-A -- 59.40 mV 60.00 mV 60.60 mV SDX15G2 SDX15D4 -- 86.85 mV 90.00 mV 93.15 mV 0 psid to 15 psid 30 psid SDX15G2-A SDX15D4-A -- 89.10 mV 90.00 mV 90.90 mV SDX15A2 86.85 mV 90.00 mV 93.15 mV SDX15A4 86.85 mV 90.00 mV 93.15 mV 0 psia to 15 psia 30 psia SDX15A2-A 89.10 mV 90.00 mV 90.90 mV SDX15A4-A 89.10 mV 90.00 mV 90.90 mV SDX30G2 SDX30D4 -- 86.85 mV 90.00 mV 93.15 mV 0 psid to 30 psid 60 psid SDX30G2-A SDX30D4-A -- 89.10 mV 90.00 mV 90.90 mV SDX30A2 86.85 mV 90.00 mV 93.15 mV SDX30A4 86.85 mV 90.00 mV 93.15 mV 0 psia to 30 psia 60 psia SDX30A2-A 89.10 mV 90.00 mV 90.90 mV SDX30A4-A 89.10 mV 90.00 mV 90.90 mV SDX100G2 SDX100D4 -- 96.50 mV 100.00 mV 103.5 mV 0 psid to 100 psid 150 psid SDX100G2-A SDX100D4-A -- 99.00 mV 100.00 mV 101.0 mV SDX100A2 96.50 mV 100.00 mV 103.5 mV SDX100A4 96.50 mV 100.00 mV 103.5 mV 0 psia to 100 psia 150 psia SDX100A2-A 99.00 mV 100.00 mV 101.0 mV SDX100A4-A 99.00 mV 100.00 mV 101.0 mV * Ordering information: Order model number. (-A) = Prime Grade Pressure Connection and Pressure Type G2 = D2 DIP Package, Temperature Compensated Gage Sensor G2-A = D2 DIP Package, Prime Grade, Temperature Compensated Gage Sensor D4 = D4 DIP Package, Temperature Compensated Differential Sensor D4-A = D4 DIP Package, Prime Grade, Temperature Compensated Differential Sensor A2 = D2 DIP Package, Temperature Compensated Absolute Sensor A2-A = D2 DIP Package, Prime Grade, Temperature Compensated Absolute Sensor A4 = D4 DIP Package, Temperature Compensated Absolute Sensor A4-A = D4 DIP Package, Prime Grade, Temperature Compensated Absolute Sensor GENERAL SPECIFICATIONS Characteristic Description (Maximum Ratings) All Devices Supply Voltage (VS) 20 Vdc Common Mode Pressure 150 psig Lead Soldering Temperature 250 C 482 F (2 seconds to 4 seconds) ENVIRONMENTAL SPECIFICATIONS Characteristic Description (Maximum Ratings) All Devices Compensated Operating Temperature 0 C to 50 C 32 F to 122 F Operating Temperature -40 C to 85 C -40 F to 185 F Storage Temperature -55 C to 125 C -67 F to 257 F Humidity Limits 0 % RH to 100 % RH 2 Honeywell Sensing and Control