GL4800E0000F Sharp

GL4800E0000F Infrared Emitting Diode GL4800E0000F Features Agency Approvals/Compliance 1. Side view emission type 1. Compliant with RoHS directive (2002/95/EC) 2. Plastic mold with resin lens 2. Content information about the six substances specified in Management Methods for Control of 3. Medium directivity angle (: 30 TYP.) Pollution Caused by Electronic Information Prod- Peak emission wavelength: 950 nm TYP. ucts Regulation (popular name: China RoHS) 4. Radiant flux e: 0.7 mW MIN. (Chinese: ); 5. Lead free and RoHS directive component refer to page 7 Applications 1. Optoelectronic switching 2. Office automation equipment 3. Audio visual equipment 4. Home appliances 5. Telecommunication equipment 6. Measuring equipment 7. Tooling machines 8. Computers Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D1-A01001EN Date: March 30, 2007 SHARP CorporationGL4800E0000F Outline Dimensions (R.45) 1.25 3.0 0.8 1.6 2 - C0.5 2 8 (0.8) 0.1 MAX. 8 2 1.5E.PIN 0.1 MAX. 0.7 2 - 0.9 +0.3 2 - 0.45 -0.1 +0.3 2 - 0.25 -0.1 1 2 (2.54) 8 8 8 8 Pin Arrangement 1 No. Name 1 Cathode 2 Anode 2 2 2 NOTES: 1. Units: mm 2. Unspecified tolerances: 0.2 3. Package: Pink transparent epoxy resin 4. ( ): Reference dimensions 5. The thin burr thickness (0.05 mm MAX.) and the gate burr (0.3 mm MAX.) shall not be included in the outline dimensions. 6. Protruded resin 0.3 mm MAX. However, the thin burr adheres to the lead 1.8 mm MAX. from the resin. Sheet No.: D1-A01001EN 2 0.3 MAX. 0.2 MAX. Resin burr 0.8 1.5 Resin burr 1.0E.PIN 1.7 1.0 17.5 0.5 1.6 0.5 MIN. 3.5 1.8 0.8 1.65 0.3 MAX. Gate burr