GP1S51VJ000F Gap : 3mm Slit : 0.5mm GP1S51VJ000F Phototransistor Output, Case package Transmissive Photointerrupter Description Agency approvals/Compliance GP1S51VJ000F is a standard, phototransistor output, 1. Compliant with RoHS directive transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For Applications this family of devices, the emitter and detector are insert- 1. General purpose detection of object presence or mo- ed in a case, resulting in a through-hole design. tion. The case includes additional screw fixing holes, on 2. Example : Printer, FAX, Optical storage unit both sides 3.2mm diameter. Features 1. Transmissive with phototransistor output 2. Highlights: Verical Slit for alternate motion detection Includes additional screw xing holes 3. Key Parameters: Gap Width : 3mm Slit Width (detector side): 0.5mm Package : 12.21018mm 4. RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of con rmation by device speci cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device speci cation sheets before using any SHARP device. Sheet No.: D3-A02401FEN 1 Date Oct. 3. 2005 SHARP Corporation2R3 GP1S51VJ000F Internal Connection Diagram Top view 1 4 1 Anode 2 Cathode 3 Collector 4 Emitter 2 3 Outline Dimensions (Unit : mm) Top view S51 Sharp mark S Model No. 2 0.3 A-A B-B 12.2 Date code section section +0.2 3 (Both side) 0.1 5 0.5 0.5 0.2 AB 23.2 +0.3 0.45 A B 0.1 +0.3 0.40.1 (9.2) (2.54) 12 18 2 3 1 4 Unspeci ed tolerance shall be as follows Dimensions (d) Tolerance d6 0.1 6 d 18 0.2 < ( ) : Reference dimensions Product mass : approx. 0.7g Dip soldering material : Sn 3Ag0.5Cu Sheet No.: D3-A02401FEN 2 1.5 10 7.5 (2.5) 5 (Detctor center) 3.5 MIN. 7 10 6