PC3SF11YVZ Series
V : 600V, Reinforced insulation type
DRM
PC3SF11YVZ
Non-zero cross type
DIP 6pin
Series
Phototriac Coupler for triggering
Zero cross type is also available.
(PC3SF21YVZ Series)
Description Agency approvals/Compliance
PC3SF11YVZ Series reinforced insulation type 1. Recognized by UL1577 (Double protection isolation),
Phototriac Coupler include an infrared emitting diode file No. E64380 (as model No. 3SF11)
(IRED) optically coupled to an output Phototriac. 2. Approved by CSA, file No. CA95323 (as model No.
These devices feature full wave control and are 3SF11)
ideal isolated drivers for medium to high current Triacs. 3. Approved by BSI : BS-EN60065, file No. 6690/BS-
DIP package provides 5.0kV isolation from input to EN60950, file No. 7421, (as model No. 3SF11)
output with superior commutative noise immunity. 4. Approved by SEMKO, EN60065/EN60950, file No.
0033029 (as model No. 3SF11)
5. Approved by DEMKO, EN60065/EN60950, file No.
Features
310107 (as model No. 3SF11)
1. High repetitive peak off-state voltage (V : 600V)
DRM
6. Approved by FIMKO, EN60065/EN60950, file No.
2. Non-zero crossing functionality
15795 (as model No. 3SF11)
3. I ranks available (see Model Line-up section in this
FT ( )
7. Approved by VDE (DIN EN 60747-5-2), file No.
datasheet)
40008189 (as model No. 3SF11)
4. 6 pin DIP package
8. Package resin : UL flammability grade (94V-0)
5. Reinforced insulation type (MIN. 0.4mm internal
()
DIN EN60747-5-2 : successor standard of DIN VDE0884
separation)
Up to Date codeR (December 2003), approval of DIN
6. Superior noise immunity (dV/dt : MIN. 1 000V/s) VDE0884.
From Date codeS1" (January 2004), approval of DIN
7. Lead-free components are also available (see Model
EN60747-5-2.
Line-up section in this datasheet)
8. Double transfer mold construction (Ideal for Flow
Soldering)
Applications
9. High isolation voltage between input and output
1. Triggering for Triacs used to switch on and off
(V (rms) : 5.0kV)
iso
devices which require AC Loads.
For example heaters, fans, motors, solenoids, and
valves.
2. Triggering for Triacs used for implementing phase
control in applications such as lighting control and
temperature control (HVAC).
3. AC line control in power supply applications.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A08001EN
1 Date Mar. 31. 2004
SHARP CorporationPC3SF11YVZ Series
Internal Connection Diagram
1
Anode
1
6
2
Cathode
3
NC
2 5
4
Anode/Cathode
5
No external connection
3 4
6
Cathode/Anode
(Unit : mm)
Outline Dimensions
1. Through-Hole [ex. PC3SF11YTZ] 2. Wide Through-Hole Lead-Form [ex. PC3SF11YVZ]
0.3 0.3
1.2
1.2
0.2
0.6
0.2
0.6
Model No.
6 4
5
Model No.
SHARP
SHARP 6 5 4
mark
Rank mark
mark
Rank mark
3SF11
3SF11
Anode
4
Anode
4 mark
mark
Date code (2 digit)
Date code (2 digit)
1
2 3
1 3
VDE
Factory identification mark 2
identification mark
VDE
Factory identification mark
0.5 0.3
identification mark
7.12
7.62
0.3
0.5
7.12 7.62
Epoxy resin
Epoxy resin
0.1
0.25 0.5 0.1
2.54
0.26
0.5
0.25 0.1
10.16
2.54 0.5
: 0 to 13
Product mass : approx. 0.35g Product mass : approx. 0.35g
3. SMT Gullwing Lead-Form [ex. PC3SF11YXP] 4. Wide SMT Gullwing Lead-Form [ex. PC3SF11YWP]
0.3 0.2
0.6
1.2 0.3
0.2
1.2
0.6
Model No.
6 5 4
6 5 4
Model No.
SHARP
SHARP
mark
Rank mark
mark
Rank mark
3SF11
3SF11
Anode
4
Anode
mark
4
mark
Date code (2 digit)
Date code (2 digit)
1 2 3
1 2 3
Factory identification mark
VDE
Factory identification mark
VDE
identification mark
identification mark
0.5 0.3
7.12
7.62
0.5 0.3
7.12 7.62
Epoxy resin
0.25
0.25
2.54
2.54 Epoxy resin +0.4
+0.4
0.25 0.5 0.25
1.0
1.00 0
0.75 10.16 0.75
+0
10.0 MAX.
0.5
12.0
Product mass : approx. 0.33g Product mass : approx. 0.34g
5
Pin is not allowed external connection
Sheet No.: D2-A08001EN
2
0.5
2.9
0.5
0.5
6.5
3.5 0.5 0.5
3.5 6.5
TYP.
0.5
0.1
3.25 0.5
0.26
0.25
0.35
0.5
2.9
0.5 0.5 0.5
0.5
3.5
3.5 6.5
3.25
0.5
6.5 TYP.
0.1
0.5
0.26
MIN.
2.7
0.25
0.25