S2S3 Series
V : 600V, Non-zero cross type
DRM
S2S3 Series
Mini-Flat Package
Zero cross type is also available. (S2S4 Series)
Phototriac Coupler for triggering
Description Agency approvals/Compliance
S2S3 Series Phototriac Coupler include an infrared 1. Recognized by UL1577 (Double protection isolation),
emitting diode (IRED) optically coupled to an output file No. E64380 (as model No. S2S3)
Phototriac. 2. Approved by CSA, file No. CA95323 (as model No.
These devices feature full wave control and are S2S3)
( )
ideal isolated drivers for medium to high current Triacs. 3. Optionary available VDE Approved (DIN EN
SOP package provides 3.75kV isolation from input 60747-5-2), file No. 40009162 (as model No. S2S3)
to output with superior commutative noise immunity. 4. Package resin : UL flammability grade (94V-0)
()
DIN EN60747-5-2 : successor standard of DIN VDE0884.
Up to Date codeR (December 2003), approval of DIN
Features VDE0884.
From Date codeS1" (January 2004), approval of DIN
1. High repetitive peak off-state voltage (V : 600V)
DRM
EN60747-5-2.
()
2. Non-zero crossing functionality Reinforced insulation type is also available.
(PC3SG11YIZ Series)
3. I ranks available (see Model Line-up section in this
FT
datasheet)
4. 4pin Mini-flat package
Applications
5. Superior noise immunity (dV/dt : MIN. 100V/s)
1. Triggering for Triacs used to switch on and off
6. Lead-free components are also available (see Model
devices which require AC Loads.
Line-up section in this datasheet)
For example heaters, fans, motors, solenoids, and
7. Double transfer mold construction (Ideal for Flow
valves.
Soldering)
2. Triggering for Triacs used for implementing phase
8. High isolation voltage between input and output
control in applications such as lighting control and
(V (rms) : 3.75kV)
iso
temperature control (HVAC).
3. AC line control in power supply applications.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A06501EN
1 Date Mar. 31. 2004
SHARP CorporationS2S3 Series
Internal Connection Diagram
1
Anode
1
4
2
Cathode
3
Anode/Cathode
4
Cathode/Anode
2
3
(Unit : mm)
Outline Dimensions
VDE option
0.3 0.3
3.6 3.6
0.25 0.25
2.54 2.54
4 3 4 3
Date code (2 digit) Date code (2 digit)
SHARP SHARP
mark mark
Model No. Model No.
Anode Anode
mark mark
2S3 2S3
4
Factory identification mark
Factory identification mark
0.1 0.1
1 2 1 2
0.4 0.4
VDE identification mark
0.3
5.3
Epoxy resin
0.3
5.3
Epoxy resin
45
45
+0.4
0.5
0.2
+0.4
+0.2 0.5
0.2
7.0
0.7
+0.2
7.0
0.7
Product mass : approx. 0.09g Product mass : approx. 0.09g
Sheet No.: D2-A06501EN
2
6
6
0.1 0.2
0.1 2.6
0.05 0.2
4.4
0.2
0.1 0.2
0.1 2.6
0.2
0.05
0.2 4.4