TM RS10002 WiSeMCU Module PRODUCT BRIEF TM RS10002 WiSeMCU RS10002: Multi-protocol Wireless and Secure Microcontroller for the Internet of Things Redpine Signals RS10002 WiSeMCU device is the industry s first Wireless MCU with a multi-protocol wireless (Wi-Fi+Bluetooth+Zigbee) sub-system. It is a fully integrated module with an ultra-low-power ARM Cortex M4F microcontroller as an application processor, a built-in wireless subsystem, advanced security, power-management, frequency reference, RF power-amplifiers, diversity RF Front-end and passives. The WiSeMCU comes with an SDK to enable plug-and-play hardware and software development for the wireless Internet of things. The ultra-low-power microcontroller subsystem in RS10002 integrates an ARM Cortex M4F processor with 104 KB of on-chip SRAM and 512KB of on-chip flash available for application 2 2 development. A slew of peripherals including, multiple USARTs, SPIs, I Cs and I S-bus interfaces, comprehensive timers and 12-bit ADC satisfy the interfacing needs of most IoT devices. The comprehensive wireless networking subsystem in RS10002 integrates 1x1 802.11n, advanced TCP/IP networking stack, Bluetooth4.0 solution with integrated application profiles and ZigBee for Home Automation and Smart Energy applications. Application Subsystem Features: Wireless Subsystem Features: ARM Cortex-M4F processor, running at a frequency of up to 100 MHz WLAN: Compliant to IEEE 802.11 b/g/n with dual band support. IntegratedFloating Point Unit (FPU), Memory Protection Unit (MPU), Built-in Nested Vectored Bluetooth: Compliant to dual-mode Bluetooth V4.0 Interrupt Controller (NVIC), Non-maskable Interrupt (NMI) input ZigBee: Compliant to IEEE 802.15.4 Debug options: Serial Wire Debug and JTAG boundary scan mode (BSDL) Supports both 20MHz and 40MHz bandwidth in WLAN. 512 kB on-chip flash program memory with flash accelerator and 256 byte page erase & write WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm. 104 kB SRAM for code and data use Support for Bluetooth Transmit power class-1 with integrated PA and high ROM with code for flash ISP/IAP, USART and IC communication, and power control performance Boot loader with boot options from flash or external source via USART Bluetooth receiver with -94dBm Rx sensitivity. Flash In-Application Programming (IAP) and In-System Programming (ISP) Support for multiple ZigBee output powers up to +15dBm with integrated PA and high performance ZigBee receiver with -102dBm Rx sensitivity. Support for multiple Clock generation options: 12 MHz internal RC oscillator, watchdog oscilla Dual external antenna (diversity supported). tor, 32 kHz low-power RTC oscillator, External clock input option Peripheral Interfaces: Three USARTs support, One SPI controllers, four slave selects, Two IC Embedded WLAN stack, ZigBee stack, BT stack and full-featuredTCP/IP 2 bus interfaces, one I S bus interface and General-Purpose Input/Output (GPIO) pins. network stack. Comprehensive Timers: Five 32-bit general-purpose timer/counters, One 16/32-bit, multi- Support for Embedded Wi-Fi Direct, Enterprise Security, Client mode and purose State-Configurable Timer (SCTimer/PWM), 32-bit Real-time clock (RTC), One 24-bit, Access Point mode. four-channel Multi-Rate Timer (MRT), Windowed Watchdog Timer (WWDT). Ultra-low power Supports advanced security features: WPA/WPA2-Personal and Enterprise Micro-tick Timer. Repetitive Interrupt Timer (RIT) (EAP-TLS, EAP-FAST, EAP-TTLS, PEAP-MSCHAP-V2) Analog peripherals: 12-bit, 8-channel, Analog-to-Digital Converter (ADC) supporting 4.8 BT profile support Msamples/s. Zigbee Pro stack embedded. Security: Unique ID for each device, Hardware Security Accelerators Advanced low power modes with deep power down <100nA, Wi-Fi standby Four reduced power modes: Sleep, Deep-sleep, Power-down, and Deep power-down associated mode <0.3mA Power-On Reset (POR) Brown Out Detect (BOD) with separate thresholds for interrupt and forced reset Power supply Package and Operating Temperature 2.2 V to 3.6 V for application and ultra-low-power processor subsystem. Module size: 14mm x 15mm 3.0-3.6V for Wireless Subsystem... Industrial Grade -40C to +85C R S 1 0 0 0 0Module Specifications Applications Home Automation - Displays/Thermostats Other M2M applications IEEE 802.11 b/g/j, 802.11n, 802.11d/e/i/w, 802.1X, 802.11k/r/v, Bluetooth Network Standard Support Home Appliances Smart Meters Medical Devices v2.1 EDR, v3.0 + HS, v4.0 802.15.4-2006 (2.4GHz) Security Systems IP Network Sensor Nodes Gaming Consoles Data Rates 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7) 802.11b: from 1 Mbps to 11 Mbps Wi-Fi- BT Gateway, WiFi-ZB Gateway Intelligent Sensing Bluetooth: 1, 2, 3Mbps Portable fitness & health monitoring Wearables 802.15.4-2006: 250Kbps Fleet management and asset tracking Industrial monitoring Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM Wireless Headsets and speakers and control 802.11b with CCK and DSSS Bluetooth: GFSK, DQPSK, 8DPSK 802.15.4-2006: DSSS 802.11n Advanced Features 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream Evaluation Package STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU The evaluation package comprises WiSeMCU module based board, accompanied by SDK and inside A-MPDU, PSMP, MTBA, Fragmentation and Virtual AP support source code for peripheral interfaces, API library and hardware and software documentation. Bluetooth Advanced Features Scatternet, Adaptive Frequency Hopping, Interlaced scanning, For details on availability please contact sales 15 active slaves in proprietary mode, hold, sniff and park modes ZigBee Advanced Features CCM* security, orphan scanning, coordinator realignment, mesh routing Device Ordering Information The device numbering is based on the following naming convention. All the devices are Wi-Fi modes Embedded Wi-Fi client, Access point, Wi-Fi Direct labeled as RS10002-XYZ-S0M Where Bluetooth Modes Master, slave, scatternet Zigbee Modes Zigbee Coordinator, Router, End device Network Protocols TCP, UDP, DHCP, ARP, IGMP, DNS client. Integrated web server, ZigBee and BT Stack. QoS WMM and WMM Power Save Support MCU Peripherals/Interfaces I2C, I2S, SPI, USART, GPIO, JTAG, Analog(ADC) and Ultra-low-power peripherals, Timers, SCT-Timer/PWM,RTC, MRT, WWDT, POR, BOD, RC OSC,WD OSC,32kHz RTC, PLL Supply Voltage 3.0-3.6V, 2.2-3.6V Operating Temperature Industrial Grade -40C to +85C Tx Power(+/-2 dBm) Wi-Fi: 18 dBm for 802.11b CCK 18 dBm for 802.11g/n OFDM Bluetooth: 15dBm ZigBee: 15dBm System Block Diagram Rx Power (+/-1 dBm) Wi-Fi: 1 Mbps -97 dBm 54 Mbps -75 dBm MCS7: -72 dBm Bluetooth: -94 dBm ZigBee: 250 Kbps -102 dBm Software and Regulatory WiFi Alliance (802.11bgn, WPA, WPA2 Personal and Enterprise, WMM,Certification Support WMM-PS, WPS, Wi-Fi Direct, Voice-Personal, Protected management frames), Cisco CCX v5 , Zigbee Certification Bluetooth Qualification, FIPS 140-2, World-Wide Regulatory Compliance (FCC, IC, CE, ETSI, TELEC) 14mm x 15mm Module : These features are not supported by current software releases. Contact Redpine Signals sales (sales redpinesignals.com) for details. For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. 2107 North First Street Suite 540 San Jose, CA 95131 Phone: +1 408 7483385 Email:sales redpinesignals.com Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. www.redpinesignals.com Copyright 2015 Redpine Signals, Inc. All Rights Reserved.