RS9113 n-Link , Connect-io-n and WiSeConnect Modules Evaluation Board PRODUCT BRIEF RS9113 n-Link , Connect-io-n and WiSeConnect Modules Evaluation Board The RS9113 n-Link , Connect-io-n , WiSeConnect module families are based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth 4.0 + ZigBee Convergence SoC. The RS9113 modules integrate a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch, Quad-SPI Flash and even an on-board antenna in some cases thus providing a fully-integrated, plug-and-play solution for embedded wireless applications. These modules come with a rich set of interfaces allowing maximum flexibility of integration into any Host Processor or Micro-controller system. The RS9113 Evaluation Kit (EVK) is a single platform that enables evaluation of both hosted (n-Link ), (Connect-io-n ) and embedded (WiSeConnect ) RS9113 modules. It can be interfaced to multiple Host Processors or Micro-controllers over interfaces like SDIO, USB, USB-CDC, SPI and UART. The EVK includes a sample driver, supplicant and example applications to test the following: 1) Wireless Functionality for Wi-Fi, Bluetooth 4.0 and ZigBee 2) Security modes 3) Throughputs 4) Power Consumption 5) Firmware Upgrade Evaluation Kit Evaluation Kit Contents The RS9113 Module Evaluation Kit comes with the following components: 1) RS9113 Module Evaluation Board 2) USB Pen Drive 3) Micro A/B-type USB cable 4) SDIO Adaptor Cable 5) SPI Adaptor Cable 6) Female - Female Cables R S 9 1 1 3Wireless Specifications Evaluation Board Network Standard Support The Evaluation Board is designed to configure the module to use the interface on which power supply is IEEE 802.11 a/b/g/n, 802.11j , 802.11d/e/i, 802.11w , 802.1X, 802.11k , detected. This is indicated through the LEDs mounted on the board. 802.11v , 802.11r , 802.11h Bluetooth v2.1 EDR, v4.0 802.15.4-2009 (2.4GHz) Data Rates 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7) 802.11a/g: from 6 Mbps to 54 Mbps 802.11b: from 1 Mbps to 11 Mbps Bluetooth: 1, 2, 3Mbps 802.15.4-2009: 250Kbps Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, 64-QAM 802.11b with CCK and DSSS Bluetooth: GFSK, DQPSK, 8DPSK 802.15.4-2009: DSSS 802.11n Advanced Features 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU inside A-MPDU and Virtual AP support Bluetooth Advanced Features Scatternet, Adaptive Frequency Hopping, Interlaced scanning, 15 active slaves in proprietary mode, hold, sniff and park modes ZigBee Advanced Features CCM* security, orphan scanning, coordinator realignment There is a 2-pin inline jumper available for measuring the current being sourced by the module during different stages of operation. This is labeled as MEASURE on the PCB. The user may connect a power Wi-Fi modes Wi-Fi client, Access point, Wi-Fi Direct meter or an ammeter to this jumper to measure the current. Bluetooth Modes Master, slave, scatternet The USB drive is bootable. It is loaded with Fedora Core 18 OS with the OneBox-Mobile driver binaries ZigBee Modes ZigBee Coordinator , Router , End device included for evaluation of n-Link modules on a standard PC/Laptop platform. QoS WMM and WMM Power Save Support The USB drive also has the release package for the Connect-io-n / WiSeConnect modules which Host Interfaces USB 2.0, SPI, UART includes the firmware, documentation and reference projects for multiple platforms. Other Peripherals/Interfaces I2C, I2S, SPI, QSPI, USART, GPIO, JTAG, Analog(ADC/DAC) and Redpine provides drivers for multiple OSs and MCU platforms for the n-Link modules and also OS-less Ultra-low-power peripherals. MCU platforms for WiSeConnect modules. The software provided in this kit is to enable easy and quick evaluation on a PC. Please contact Redpine Signals Sales (sales redpinesignals.com) for availability of Supply Voltage 3.0-3.6V, 1.8-3.6V drivers for an OS and MCU of your choice. Operating Temperature Industrial Grade -40C to +85C Software and Regulatory Certification Wi-Fi Alliance Compliance (802.11bgn, WPA, WPA2 Personal and Ordering Information Enterprise, WMM, WMM-PS, WPS, Wi-Fi Direct, Voice-Personal , Part Numbers Protected management frames ), Cisco CCX v5 , Bluetooth-SIG Qualification , Worldwide Regulatory Compliance: FCC (IDs are XF6-RS9113SB, XF6-RS9113DB) IC (IDs are 8407A-RS9113SB, 8407A-RS9113DB) CE/ETSI, TELEC , SRRC Typical Transmit Wi-Fi: 18 dBm for 802.11b DSSS Power(+/-2 dBm) 18 dBm for 802.11g/n OFDM 12 dBm for 802.11a/n OFDM Bluetooth: 15 dBm ZigBee : 15 dBm Related Links: Rx sensitivity Wi-Fi: 1Mbps -97 dBm (< 8% PER) z RS9113 n-Link Module Product Brief (+/- 1dBm) 54 Mbps -76.5 dBm (< 10% PER) z RS9113 Connect-io-n Module Product Brief MCS7(20MHz) -73 dBm (< 10% PER) z RS9113 WiSeConnect Module Product Brief MCS7(40MHz) -69.5 dBm (< 10% PER) Bluetooth: 1 Mbps -94 dBm 2 Mbps -92 dBm : These features are not supported by current software releases. Contact Repine Signals Sales 3 Mbps -84 dBm (sales redpinesignals.com) for details. BTLE(1Mbps) -91 dBm : These certifications are in progress at this time. Contact Redpine Signals Sales ZigBee: 250 Kbps -102 dBm (< 8% PER) (sales redpinesignals.com) for more details and for certifications not listed here. : Applicable to n-Link modules only For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. 2107 North First Street Suite 540 San Jose, CA 95131 Phone: +1 408 748 3385 Email: sales redpinesignals.com Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. www.redpinesignals.com Copyright 2017 Redpine Signals, Inc. All Rights Reserved.