RS9113 WiSeConnect Module Family PRODUCT BRIEF 1x1 802.11abgn + BT4.0 + ZigBee The RS9113 WiSeConnect module is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB) Convergence SoC. The RS9113 module is a complete IEEE 802.11 a/b/g/n, ZB and BT wireless device server that provides a wireless interface to any equipment with a SDIO, UART, SPI or USB interface. The RS9113 module integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications and all WLAN, BT and ZB protocols and networking stack functionality in embedded firmware to make a fully self-contained wireless solution for a variety of applications. The module integrates an antenna and a U.FL connector for external antenna TM with an option to select either one of them. The M2MCombo (RS9113) chips and modules leverage and improve upon Redpines proven low power innovations from Lite-Fi products (RS9110) and provide WLAN 802.11n, BT4.0 and ZB convergence solution for integration into mobile and M2M communication devices. Features and Benefits RS9113 WiSeConnect module integrates WLAN, BT 4.0 and ZigBee functions. WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support. Bluetooth: Compliant to dual-mode Bluetooth V4.0 ZigBee: Compliant to IEEE 802.15.4 Supports both 20MHz and 40MHz bandwidth. WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm. Module without integrated antenna Module with integrated antenna Support for Bluetooth Transmit power class-1 with integrated PA and high performance Applications Bluetooth receiver with -94dBm Rx sensitivity. IoT Devices Music and video players Support for multiple ZigBee output powers up to +19dBm with integrated PA and high VoWi-Fi phones Medical Devices perform ance ZigBee receiver with -100dBm Rx sensitivity. Smart Meters and in-home displays Industrial monitoring and control U.FL connector for external antenna connection is selectable. Industrial automation and telemetry Home and building automation Dual external antenna (diversity supported). Embedded WLAN stack, ZigBee stack, BT stack, TCP/IP stack, HTTP server. Wi-Fi-BT gateway device Wi-Fi-ZB gateway device Support for Embedded Client mode and Access Point mode. Wireless headset BT profile support for GAP,SDN,PAN,SPP,IAP,HFP 1.5,GATT,ATTR,IAP,A2DP,ACRP. Evaluation Package Supports for ZigBee profiles like Home-automation and Smart Energy The evaluation package comprises RS9113 WiSeConnect module based evaluation Supports SPI, UART, USB, SDIO host interfaces. board. This is accompanied by driver source code for host interface, firmware and Can operate with 8-bit microcontrollers with no OS. documentation. Single supply 3.0 to 3.6 V operation. RS9113 Module Block Diagram with integrated antenna RS9113 Module Block Diagram without integrated antenna R S 9 1 1 3Wireless Specifications Device Ordering Information Network Standard Support IEEE 802.11 a/b/g/n, 802.11j , 802.11d/e/i, 802.11w , 802.1X, 802.11k , The device numbering is based on the following naming convention. All the devices are labeled as 802.11v , 802.11r , 802.11h RS9113-XYZ-ABC Where, Bluetooth v2.1 EDR, v4.0 802.15.4-2009 (2.4GHz) Data Rates 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7) 802.11a/g: from 6 Mbps to 54 Mbps 802.11b: from 1 Mbps to 11 Mbps Bluetooth: 1, 2, 3Mbps 802.15.4-2009: 250Kbps Modulation Techniques OFDM with BPSK, QPSK, 16-QAM, 64-QAM 802.11b with CCK and DSSS Bluetooth: GFSK, DQPSK, 8DPSK 802.15.4-2009: DSSS 802.11n Advanced Features 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU Examples: inside A-MPDU and Virtual AP support RS9113-NBZ-S0N will refer to single band n-Link module with no antenna and integrated Wi-Fi, Bluetooth Advanced Features Scatternet, Adaptive Frequency Hopping, Interlaced scanning, Bluetooth and Zigbee. RS9113-N00-D1C will refer to a dual band Connect-io-n module with embedded single antenna and 15 active slaves in proprietary mode, hold, sniff and park modes integrated Wi-Fi. ZigBee Advanced Features CCM* security, orphan scanning, coordinator realignment RS9113-NB0-S0W will refer to a single band WiSeConnect module with no antenna and integrated Wi-Fi and Bluetooth. Wi-Fi modes Wi-Fi client, Access point, Wi-Fi Direct Bluetooth Modes Master, slave, scatternet Module Reference Design ZigBee Modes ZigBee Coordinator , Router , End device Redpine offers form-factor SPI, USB2.0, UART and SDIO reference designs along with software for manufacture testing and diagnostics. For details on availability please contact sales QoS WMM and WMM Power Save Support Host Interfaces USB 2.0, SPI, UART Other Peripherals/Interfaces I2C, I2S, SPI, QSPI, USART, GPIO, JTAG, Analog(ADC/DAC) and Ultra-low-power peripherals. Supply Voltage 3.0-3.6V, 1.8-3.6V Operating Temperature Industrial Grade -40C to +85C Software and Regulatory Certification Wi-Fi Alliance Compliance (802.11bgn, WPA, WPA2 Personal and Enterprise, WMM, WMM-PS, WPS, Wi-Fi Direct, Voice-Personal , Protected management frames ), Cisco CCX v5 , Bluetooth-SIG Qualification , Worldwide Regulatory Compliance: FCC (IDs are XF6-RS9113SB, XF6-RS9113DB) IC (IDs are 8407A-RS9113SB, 8407A-RS9113DB) CE/ETSI, TELEC , SRRC Typical Transmit Wi-Fi: 17.5 dBm for 802.11b DSSS Power(+/-2 dBm) 17.5 dBm for 802.11g/n OFDM 12 dBm for 802.11a/g/n OFDM Bluetooth: 15 dBm ZigBee : 15 dBm Rx sensitivity Wi-Fi: 1Mbps -97 dBm (< 8% PER) (+/- 1dBm) 54 Mbps -76.5 dBm (< 10% PER) MCS7(20MHz) -73 dBm (< 10% PER) MCS7(40MHz) -69.5 dBm (< 10% PER) Bluetooth: 1 Mbps -94 dBm 2 Mbps -92 dBm 3 Mbps -84 dBm BTLE(1Mbps) -91 dBm ZigBee: 250 Kbps -102 dBm (< 8% PER) : These features may not be supported by current software releases. Contact Repine Signals Sales (sales redpinesignals.com) for details. : These certifications are in progress at this time. Contact Redpine Signals Sales (sales redpinesignals.com) for more details and for certifications not listed here. : Applicable to n-Link modules only For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. 2107 North First Street Suite 540 San Jose, CA 95131 Phone: +1 408 748 3385 Email: sales redpinesignals.com Website: www.redpinesignals.com Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. Copyright 2016 Redpine Signals, Inc. All Rights Reserved.