RS9113-NBZ-D1N-EVB Silicon Labs

T M R S 9 1 1 3 n - L i n k M O D U L E F A M I L Y P R O D U C T B R I E F 1x1 802.11abgn + BT4.0 + ZigBee The RS9113 n-Link module family is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + BT4.0 + ZigBee Convergence SoC. The RS9113 module integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual- band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications. The RS9113 T M based chips and modules leverage and improve upon Redpines proven low power innovations from Lite-F products (RS9110) and provide WLAN 802.11n, BT4.0 and ZigBee convergence solution for integration into mobile and M2M communication devices. It can connect to a host processor through SDIO, USB, SPI or UART interfaces. Features and Benefits Ultra-low-power, low-cost and high-throughput 1 Tx 1 Rx Dual-band 802.11n + BT4.0 (dual-mode) + Zigbee (802.15.4-2009) Supports 20MHz and 40MHz bandwidth Data rates up to 150 Mbps using 1-Spatial Stream 802.11n WLAN Tx output power up to +18dBm WLAN Receiver with -97dBm Rx sensitivity High performance Bluetooth receiver with -94dBm Rx sensitivity Support for Bluetooth Transmit power class-1 with integrated PA Applications High performance ZigBee receiver with -100dBm Rx sensitivity Support for multiple ZigBee output powers up to +19dBm with integrated PA Smart phones, Tablets and e-Readers MP3 music and MP4 video players Innovative coexistence algorithms for optimum throughput of Wi-Fi and collocated Bluetooth VoWi-Fi phones Medical Devices and ZigBee modems Smart Meters and in-home displays Industrial monitoring and control Integrated Ultra-low-power subsystem with <3uA watch-dog mode and <30uA standby mode. Industrial automation and telemetry Home and building automation Hardware Assisted Radar-detection for compliance to FCC and ETSI norms, enabling usage of more channels in the 5GHz band. Evaluation Package Complete software along with host driver for various operating systems such as Windows, Linux, Windows CE, and Android. The evaluation package comprises RS9113 n-Link module based evaluation board. This is accom- Single supply 3.0 to 3.6 V operation. panied by firmware, reference drivers for Linux, Windows and Android operating systems with doc- Support for multiple host interfaces to allow maximum flexibility for the system integrator. Host umentation. interfaces supported are USB 2.0, SDIO, SPI and UART R S 9 1 1 3Specifications Device Listing Device Number Description Packaging Qualification Network Standard Support IEEE 802.11a/b/g/j, 802.11n, 802.11d/e/i/w, 802.1X, 802.11k/r/v/h Single band n-Link module with no antenna and Bluetooth v2.1 + EDR, v3.0 + HS, v4.0 RS9113-N00-S0N Tray Industrial integrated Wi-Fi. 802.15.4-2009 (2.4GHz) Dual band n-Link module with no antenna and RS9113-N00-D0N Tray Industrial Data Rates 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7) integrated Wi-Fi. 802.11a/g: from 6 Mbps to 54 Mbps Single band n-Link module with embedded single RS9113-N00-S1N Tray Industrial 802.11b: from 1 Mbps to 11 Mbps antenna and integrated Wi-Fi. Dual band n-Link module with embedded single Bluetooth: 1, 2, 3Mbps RS9113-N00-D1N Tray Industrial antenna and integrated Wi-Fi. 802.15.4-2009: 250Kbps Single band n-Link module with no antenna and RS9113-NB0-S0N Tray Industrial Modulation Techniques OFDM with BPSK, QPSK, 16-QAM and 64-QAM integrated Wi-Fi and Bluetooth 802.11b with CCK and DSSS Dual band n-Link module with no antenna and RS9113-NB0-D0N Tray Industrial Bluetooth: GFSK, DQPSK, 8DPSK integrated Wi-Fi and Bluetooth 802.15.4-2009: DSSS Single band n-Link module with embedded single RS9113-NB0-S1N Tray Industrial antenna and integrated Wi-Fi and Bluetooth QoS WMM and WMM Power Save Support Dual band n-Link module with embedded single RS9113-NB0-D1N Tray Industrial 802.11n Advanced Features 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream antenna and integrated Wi-Fi and Bluetooth STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU Single band n-Link module with no antenna and RS9113-N0Z-S0N Tray Industrial inside A-MPDU, PSMP, MTBA, Fragmentation and Virtual AP support (up integrated Wi-Fi and ZigBee. to 8 BSSIDs) Dual band n-Link module with no antenna and RS9113-N0Z-D0N Tray Industrial integrated Wi-Fi and ZigBee. Bluetooth Advanced Features Scatternet, Adaptive Frequency Hopping, Interlaced scanning, Single band n-Link module with embedded single 15 active slaves in proprietary mode, hold, sniff and park modes RS9113-N0Z-S1N Tray Industrial antenna and integrated Wi-Fi and ZigBee Zigbee Advanced Features CCM* security, orphan scanning, coordinator realignment, mesh routing Dual band n-Link module with embedded single RS9113-N0Z-D1N Tray Industrial antenna and integrated Wi-Fi and ZigBee Wi-Fi modes Wi-Fi client, Access point, Wi-Fi Direct Single band n-Link module with no antenna and Bluetooth modes Master, slave, scatternet RS9113-NBZ-S0N Tray Industrial integrated Wi-Fi ,Bluetooth and ZigBee Zigbee modes Zigbee Coordinator, Router, End device Dual band n-Link module with no antenna and RS9113-NBZ-D0N Tray Industrial integrated Wi-Fi, Bluetooth and ZigBee. Host Interfaces SDIO, USB 2.0, SPI, UART Single band n-Link module with embedded single 2 2 Other Peripherals/Interface I C, I S, SPI, QSPI, UART, GPIO, JTAG, Analog and Ultra-low-power RS9113-NBZ-S1N antenna and integrated Wi-Fi, Bluetooth and Tray Industrial peripherals ZigBee. Dual band n-Link module with embedded single Supply Voltage 3.0-3.6V, 1.8-3.6V RS9113-NBZ-D1N antenna and integrated Wi-Fi, Bluetooth and Tray Industrial Operating Temperature Industrial Grade -40C to +85C ZigBee. Software and Regulatory WiFi Alliance (802.11abgn, WPA, WPA2 Personal and Enterprise, WMM, WMM-PS, WPS, Wi-Fi Direct, Voice-Personal, Protected management Device Ordering Information frames), Cisco CCX v5, Zigbee Certification Bluetooth QualificationFIPS The device numbering is based on the following naming convention. All the devices are 140-2 World-WideRegulatory Compliance (FCC, IC, CE, ETSI, TELEC) labeled as RS9113-XYZ-ABC Where, Typical Transmit Wi-Fi: 18 dBm for 802.11b DSSS Power(+/- 2 dBm) 17 dBm for 802.11g/n OFDM 15 dBm for 802.11a/g/n OFDM Bluetooth: 19 dBm ZigBee: 19 dBm Rx sensitivity Wi-Fi: 1 Mbps -97 dBm (< 8% PER) (+/- 1 dBm) 54 Mbps -76.5 dBm (< 10% PER) MCS7 (20MHz) -72 dBm (< 10% PER) MCS7 (40MHz) -69 dBm (< 10% PER) Bluetooth: 1 Mbps -93 dBm 2 Mbps -93 dBm 3 Mbps -84 dBm BTLE (1Mbps) -91 dBm Examples: ZigBee: 250 Kbps -101 dBm (< 8% PER) RS9113-NBZ-S0N will refer to single band n-Link module with no antenna and integrat ed Wi-Fi, Bluetooth and Zigbee. Module Reference Design RS9113-N00-D1C will refer to a dual band Connect-io-n module with embedded single antenna and integrated Wi-Fi. Redpine offers form-factor SPI, USB2.0, UART and SDIO reference designs along with software for RS9113-NB0-S0W will refer to a single band WiSeConnect module with no antenna manufacture testing and diagnostics. For details on availability please contact sales and integrated Wi-Fi and Bluetooth. For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. 2107 North First Street Suite 680 San Jose, CA 95131 Phone: +1408 748 3385 Email: sales redpinesignals.com www.redpinesignals.com Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. Copyright 2013 Redpine Signals, Inc. All Rights Reserved.