T M R S 9 1 1 3 W i S e C o n n e c t M O D U L E F A M I L Y P R O D U C T B R I E F 1x1 802.11abgn + BT4.0 + ZigBee The RS9113 WiSeConnect module is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB) Convergence SoC. The RS9113 module is a complete IEEE 802.11 a/b/g/n, ZB and BT wireless device server that provides a wireless interface to any equipment with a SDIO, UART, SPI or USB interface. The RS9113 module inte- grates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memo- ry, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications and all WLAN, BT and ZB protocols and networking stack functionality in embedded firmware to make a fully self-contained wireless solution for a variety of applications. The module integrates an antenna and a U.FL connector for external antenna with an option to select either one of them. The M2MCombo (RS9113) chips and modules leverage and improve upon Redpines proven low power innovations from TM Lite-Fi products (RS9110) and provide WLAN 802.11n, BT4.0 and ZB convergence solution for integration into mobile and M2M communication devices. Features and Benefits RS9113 WiSeConnect module integrates WLAN, BT 4.0 and ZigBee functions. WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support. Bluetooth: Compliant to dual-mode Bluetooth V4.0 ZigBee: Compliant to IEEE 802.15.4 Supports both 20MHz and 40MHz bandwidth. WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm. Applications Support for Bluetooth Transmit power class-1 with integrated PA and high performance Medical Devices Bluetooth receiver with -94dBm Rx sensitivity. Smart phones, Tablets and e-Readers Industrial monitoring and control Support for multiple ZigBee output powers up to +19dBm with integrated PA and high perform VoWi-Fi phones Home and building automation ance ZigBee receiver with -100dBm Rx sensitivity. Smart Meters and in-home displays Wi-Fi-BT gateway device U.FL connector for external antenna connection is selectable. Industrial automation and telemetry Wi-Fi-ZB gateway device Dual external antenna (diversity supported). Embedded WLAN stack, ZigBee stack, BT stack, TCP/IP stack, HTTP server. MP3 music and MP4 video players Wireless headset Support for Embedded Wi-Fi Direct, Enterprise Security, Client mode and Access Point mode. BT profile support for GAP,SDN,PAN,SPP,IAP,HFP 1.5,GATT,ATTR,IAP,A2DP,ACRP. Evaluation Package Supports for ZigBee profiles like Home-automation and Smart Energy The evaluation package comprises RS9113 WiSeConnect module based evaluation board. This is Supports SPI, UART, USB, SDIO host interfaces. accompanied by driver source code for host interface, firmware and documentation. Can operate with 8-bit microcontrollers with no OS. Single supply 3.0 to 3.6 V operation. R S 9 1 1 3Specifications Device Listing Device Number Description Packaging Qualification Network Standard Support IEEE 802.11a/b/g/j, 802.11n, 802.11d/e/i/w, 802.1X, 802.11k/r/v/h Single band WiSeConnect module with no anten- Bluetooth v2.1 + EDR, v3.0 + HS, v4.0 RS9113-N00-S0W Tray Industrial na and integrated Wi-Fi. 802.15.4-2009 (2.4GHz) Dual band WiSeConnect module with no antenna RS9113-N00-D0W Tray Industrial Data Rates 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7) and integrated Wi-Fi. 802.11a/g: from 6 Mbps to 54 Mbps Single band WiSeConnect module with embed- RS9113-N00-S1W Tray Industrial 802.11b: from 1 Mbps to 11 Mbps ded single antenna and integrated Wi-Fi. Dual band WiSeConnect module with embedded Bluetooth: 1, 2, 3Mbps RS9113-N00-D1W Tray Industrial single antenna and integrated Wi-Fi. 802.15.4-2009: 250Kbps Single band WiSeConnect module with no anten- RS9113-NB0-S0W Tray Industrial Modulation Techniques OFDM with BPSK, QPSK, 16-QAM and 64-QAM na and integrated Wi-Fi and Bluetooth 802.11b with CCK and DSSS Dual band WiSeConnect module with no antenna RS9113-NB0-D0W Tray Industrial Bluetooth: GFSK, DQPSK, 8DPSK and integrated Wi-Fi and Bluetooth 802.15.4-2009: DSSS Single band WiSeConnect module with embed- RS9113-NB0-S1W ded single antenna and integrated Wi-Fi and Tray Industrial QoS WMM and WMM Power Save Support Bluetooth 802.11n Advanced Features 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream Dual band WiSeConnect module with embedded RS9113-NB0-D1W Tray Industrial STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU single antenna and integrated Wi-Fi and Bluetooth inside A-MPDU, PSMP, MTBA, Fragmentation and Virtual AP support (up Single band WiSeConnect module with no anten- RS9113-N0Z-S0W Tray Industrial to 8 BSSIDs) na and integrated Wi-Fi and ZigBee. Dual band WiSeConnect module with no antenna Bluetooth Advanced Features Scatternet, Adaptive Frequency Hopping, Interlaced scanning, RS9113-N0Z-D0W Tray Industrial and integrated Wi-Fi and ZigBee. 15 active slaves in proprietary mode, hold, sniff and park modes Single band WiSeConnect module with embed- Zigbee Advanced Features CCM* security, orphan scanning, coordinator realignment, mesh routing RS9113-N0Z-S1W ded single antenna and integrated Wi-Fi and Tray Industrial ZigBee Wi-Fi modes Embedded Wi-Fi client, Access point, Wi-Fi Direct Dual band WiSeConnect module with embedded RS9113-N0Z-D1W Tray Industrial Network Protocols TCP, UDP, DHCP, ARP, IGMP, DNS client. single antenna and integrated Wi-Fi and ZigBee Integrated web server, ZigBee and BT profiles. Single band WiSeConnect module with no anten- RS9113-NBZ-S0W Tray Industrial Bluetooth modes Master, slave, scatternet na and integrated Wi-Fi ,Bluetooth and ZigBee Dual band WiSeConnect module with no antenna Zigbee modes Zigbee Coordinator, Router, End device RS9113-NBZ-D0W Tray Industrial and integrated Wi-Fi, Bluetooth and ZigBee. Host Interfaces SDIO, USB 2.0, SPI, UART Single band WiSeConnect module with embed- RS9113-NBZ-S1W ded single antenna and integrated Wi-Fi, Tray Industrial 2 2 Other Peripherals/Interface I C, I S, SPI, QSPI, UART, GPIO, JTAG, Analog and Ultra-low-power Bluetooth and ZigBee. peripherals Dual band WiSeConnect module with embedded Supply Voltage 3.0-3.6V, 1.8-3.6V RS9113-NBZ-D1W single antenna and integrated Wi-Fi, Bluetooth Tray Industrial and ZigBee. Operating Temperature Industrial Grade -40C to +85C Software and Regulatory WiFi Alliance (802.11abgn, WPA, WPA2 Personal and Enterprise, WMM, D evice Ordering Information WMM-PS, WPS, Wi-Fi Direct, Voice-Personal, Protected management The device numbering is based on the following naming convention. All the devices are frames), Cisco CCX v5, Zigbee Certification Bluetooth QualificationFIPS labeled as RS9113-XYZ-ABC 140-2 World-WideRegulatory Compliance (FCC, IC, CE, ETSI, TELEC) Where, Typical Transmit Wi-Fi: 18 dBm for 802.11b DSSS Power(+/- 2 dBm) 17 dBm for 802.11g/n OFDM 15 dBm for 802.11a/g/n OFDM Bluetooth: 19dBm ZigBee: 19dBm Rx sensitivity Wi-Fi: 1 Mbps -97 dBm (< 8% PER) (+/- 1 dBm) 54 Mbps -76.5 dBm (< 10% PER) MCS7 (20MHz) -72 dBm (< 10% PER) MCS7 (40MHz) -69 dBm (< 10% PER) Bluetooth: 1 Mbps -93 dBm 2 Mbps -93 dBm Examples: 3 Mbps -84 dBm BTLE (1Mbps) -91 dBm RS9113-NBZ-S0N will refer to single band n-Link module with no antenna and integrat ZigBee: 250 Kbps -101 dBm (< 8% PER) ed Wi-Fi, Bluetooth and Zigbee. RS9113-N00-D1C will refer to a dual band Connect-io-n module with embedded single Module Reference Design antenna and integrated Wi-Fi. Redpine offers form-factor SPI, USB2.0, UART and SDIO reference designs along with software for RS9113-NB0-S0W will refer to a single band WiSeConnect module with no antenna manufacture testing and diagnostics. For details on availability please contact sales and integrated Wi-Fi and Bluetooth. For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. 2107 North First Street Suite 680 San Jose, CA 95131 Phone: +1408 748 3385 Email: sales redpinesignals.com www.redpinesignals.com Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. Copyright 2013 Redpine Signals, Inc. All Rights Reserved.