DATA SHEET SKY13418-485LF: 0.1 to 3.8 GHz SP8T Antenna Switch Applications Any 2G/3G/4G antenna diversity or LTE (TDD/FDD) transmit/receive system for which GSM transmit is not required RF1 Features RF2 Broadband frequency range: 0.1 to 3.8 GHz Low insertion loss: 0.7 dB typical 2.7 GHz RF3 High isolation: >20 dB 2.7 GHz Integrated logic RF4 ANT Small QFN (14-pin, 2.0 x 2.0 mm) package (MSL1, 260 C per JEDEC J-STD-020) RF5 RF6 Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks RF7 Denition of Green, document number SQ04-0074. RF8 Description Bias Decoder The SKY13418-485LF is a single-pole, eight-throw (SP8T) antenna switch. The high linearity performance and low insertion loss achieved by the SKY13418-485LF make it an ideal choice for main/diversity switching commonly used in LTE-based handsets, Figure 1. SKY13418-485LF Block Diagram data cards, and tablets that use antenna diversity solutions. The SKY13418-485LF is part of a scalable family of products that Switching is controlled by three CMOS/TTL-compatible control covers SP4T through SP8T switches that allow up to eight bands voltage inputs (V1, V2, and V3). Depending on the logic voltage of WCDMA/LTE. level applied to the control pins, the ANT pin is connected to one of eight switched RF input/output (I/O) ports (RF1 to RF8) using a SKY13414-485LF SP4T Antenna Switch (Data Sheet 201689) low insertion loss path, while the paths between the ANT pin and SKY13415-485LF SP5T Antenna Switch (Data Sheet 201704) the other RF pins are in a high isolation state. No external SKY13416-485LF SP6T Antenna Switch (Data Sheet 201679) blocking capacitors are required on the RF paths unless VDC is applied externally. SKY13417-485LF SP7T Antenna Switch (Data Sheet 201661) The SKY13418-485LF is manufactured in a compact, 14-pin 2.0 x SKY13418-485LF SP8T Antenna Switch (this Data Sheet) 2.0 mm, Quad Flat No-Lead (QFN) package. The symmetric port designs provide flexibility in signal routing for A functional block diagram is shown in Figure 1. The pin both receive diversity and higher power TD-SCDMA/TDD-LTE, configuration and package are shown in Figure 2. Signal pin WCDMA/FDD, and LTE transmit/receive applications. assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201712E Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice December 5, 2016 1 VDD V3 V2 V1 201712-001DATA SHEET SKY13418-485LF: SP8T ANTENNA SWITCH 14 13 12 1 11 RF5 RF6 2 10 RF3 RF4 3 9 RF1 RF2 4 8 VDD N/C 5 6 7 201712-002 Figure 2. SKY13418-485LF Pinout (Top View) 1 Table 1. SKY13418-485LF Signal Descriptions Pin Name Description Pin Name Description 1 RF5 RF I/O path 5 8 N/C Not connected 2 RF3 RF I/O path 3 9 RF2 RF I/O path 2 3 RF1 RF I/O path 1 10 RF4 RF I/O path 4 4 VDD DC power supply 11 RF6 RF I/O path 6 5 V3 DC control voltage 3 12 RF8 RF I/O path 8 6 V2 DC control voltage 2 13 ANT Antenna port 7 V1 DC control voltage 1 14 RF7 RF I/O path 7 1 Bottom ground paddles must be connected to ground. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 December 5, 2016 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 201712E V3 RF7 V2 ANT V1 RF8