PRODUCT SUMMARY SKY5 -A1007: 0.4 to 5.9 GHz DPDT Low Insertion Loss / High-Isolation Switch Applications Automotive 4G LTE/5G/CV2X/11p telematics systems Main/Diversity antenna swapping Features Support for automotive PPAP Support for IMDS material declaration Independent BOM management to minimize PCN risk Extended operating temperature: -40 to 105 C Broadband frequency range: 0.4 to 5.9 GHz Low insertion loss: 0.7 dB (typical) CV2X/11p frequency Figure 1. SKY5A1007 Block Diagram (5.75 to 5.925 GHz) High isolation: 30 dB 3.8 GHz Description GSM power handling The SKY5A1007 is a state-of-the-art CMOS, silicon-on-insulator Small QFN (12-pin, 1.83 1.83 0.5 mm) package (SOI) double-pole, double-throw (DPDT) switch. The switch (MSL1, 260 C per JEDEC J-STD-020) provides high-linearity performance, low insertion loss, and high isolation. TM Skyworks Green products are compliant with all applicable legislation and are halogen-free. Switching is controlled by one voltage input, CTRL1. Depending For additional information, refer to Skyworks on the logic voltage level applied to this pin, the PORT1 and TM Denition of Green , document number PORT2 pins connect to one of the two other RF port pins (PORT3 SQ040074. or PORT4) through a low insertion loss path, while maintaining a high-isolation path to the alternate port. No external DC blocking capacitors are required on the RF path as long as no DC voltage is applied externally. The SKY5A1007 DPDT switch is provided in a compact Quad Flat No-Lead (QFN) 1.83 1.83 0.5 mm package. A functional block diagram is shown in Figure 1. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 205609B Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice March 11, 2020 1 DATA SHEET SKY5 -A1007: 0.4 TO 5.9 GHz DPDT LOW INSERTION LOSS/HIGH-ISOLATION SWITCH Ordering Information Part Number Product Description Evaluation Board Part Number SKY5A1007 0.4 to 5.9 GHz DPDT Low Insertion Loss / High Isolation Switch SKY5A1007EK1 Copyright 2019-2020 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (Skyworks) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 205609B Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice March 11, 2020 2