PRODUCT SUMMARY SKY66404-11: 2.4 GHz Front-End Module for Zigbee /Thread/ Bluetooth Applications Applications In-home appliances Smart thermostats Internet of Things (IoT) devices Smart lighting Logic Sensors Control +13 dBm Range extender ANT1 PA Wireless audio Features RFIN Integrated PA with up to +17 dBm output power LNA Integrated LNA (2.5 dB noise figure typical) and bypass path ANT2 Integrated antenna diversity switching for all modes 204679-001 Single-ended transmit/receive interface Figure 1. SKY66404-11 Block Diagram Fast switch on/off time: < 800 ns Supply range: 1.7 V to 3.6 V Description Sleep mode current: < 1 A typical The SKY66404-11 is a high-performance, fully integrated RF No external bias resistor is required front-end module (FEM) designed for Zigbee, Thread, and Small MCM (22-pin, 3.5 mm x 3.0 mm x 0.82 mm) package, Bluetooth (including Low Energy) applications. NiPdAu-plated (MSL3, 260 C per JEDEC-J-STD-020) The SKY66404-11 is designed for ease of use and maximum flexibility. The device provides integrated inter-stage matching TM Skyworks Green products are compliant with and harmonic filter, and digital controls compatible with 1.6 V to all applicable legislation and are halogen-free. 3.6 V CMOS levels. For additional information, refer to Skyworks TM The RF blocks operate over a wide supply voltage range from Denition of Green , document number 1.7 V to 3.6 V that allows the SKY66404-11 to be used in battery SQ040074. powered applications over a wide spectrum of the battery discharge curve. A functional block diagram is shown in Figure 1. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 205197A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice October 31, 2018 1 CSD CPS CRX CTX CHL ANT SEL PRODUCT SUMMARY SKY66404-11: 2.4 GHz FRONT-END MODULE FOR ZIGBEE /THREAD/ BLUETOOTH APPLICATIONS Ordering Information Part Number Product Description Evaluation Board Part Number SKY66404-11 2.4 GHz FEM for Zigbee/Thread/Bluetooth Applications SKY66404-11EK1 Copyright 2018 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (Skyworks) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 October 31, 2018 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 205197A