PRODUCT SUMMARY SKY66422-11: 860 to 930 MHz RF Front-End Module Applications LP-WAN devices Internet of Things Smart meters Industrial applications Range extender Features Integrated PA with +20 and +22 dBm output power (different BOMs are used to optimize efficiency): Integrated low-loss transmit bypass path: < 2.2 dB Integrated LNA with noise figure of 1.7 dB (typical) Single-ended 50 transmit/receive RF interface Figure 1. SKY66422-11 Block Diagram Fast turn-on/turn-off time: 20 sec (typical) Supply voltage: 2.5 to 3.6 V Description Sleep mode current: 0.4 A (typical) The SKY66422-11 is a high-performance, highly integrated RF front-end module designed for high-power Industrial, Scientific, MCM (16-pin, 3.0 x 3.0 x 0.75 mm) NiPdAu plated package Medical (ISM) band applications operating in the 860 to 930 MHz (MSL3, 260 C per JEDEC J-STD-020) frequency range. The SKY66422-11 is designed for ease of use and maximum flexibility with fully matched 50 TX and RX inputs, and digital controls compatible with 1.6 to 3.6 V CMOS levels. TM Skyworks Green products are compliant with The RF blocks operate over a wide supply voltage range from 2.5 all applicable legislation and are halogen-free. to 3.6 V allowing the SKY66422-11 to be used in battery powered For additional information, refer to Skyworks TM applications over a wide spectrum of the battery discharge curve. Denition of Green , document number SQ040074. The SKY66422-11 is packaged in a 16-pin, 3.0 x 3.0 x 0.75 mm Multi-Chip Module (MCM) package. Figure 1 shows the SKY66422-11 block diagram. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 205886A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice November 16, 2020 1 PRODUCT SUMMARY SKY66422-11: 860 TO 930 MHZ RF FRONT-END MODULE Ordering Information Part Number Product Description Evaluation Board Part Number SKY66422-11 +20 dBm RF Front-End Module 900 to 930 MHz SKY66422-11EK2 SKY66422-11 +20 dBm RF Front-End Module 868 MHz SKY66422-11EK1 +22 dBm RF Front-End Module 868 to 915 MHz Copyright 2020 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (Skyworks) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 November 16, 2020 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 205886A