DATA SHEET SMV2201-SMV2205 Series: Surface Mount, 0402 Silicon Hyperabrupt Tuning Varactor Diodes Applications Wide bandwidth, low phase noise VCOs Wide range voltage-tuned phase shifters and filters Features High Q, low series resistance High capacitance ratio at low reverse voltage Industry-standard 0402 footprints Description Packages rated MSL1, 260 C per JEDEC J-STD-020 The SMV2201-SMV2205 series are silicon hyperabrupt junction varactor diodes specifically designed for wide bandwidth, low-loss applications. The specified high capacitance ratio and low reverse voltage make these varactors appropriate for low phase noise Voltage Controlled Oscillators (VCOs) used at frequencies in wireless systems up to and above 2.5 GHz. Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 201953A Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice May 23, 2012 1 DATA SHEET SMV2201-SMV2205 SERIES: SURFACE MOUNT HYPERABRUPT TUNING VARACTOR DIODES Table 1. SMV2201-SMV2205 Series Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Forward current IF 20 mA Reverse voltage VR 22 V Dissipated power 25 C PD 750 mW Storage temperature TSTG 55 +200 C Junction temperature TJ 55 +175 C Solder interface temperature TS 40 +85 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although these devices are designed to be as robust as possible, Electrostatic Discharge (ESD) can damage them. These devices must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 2. SMV2201-SMV2205 Series Electrical Specifications (Note 1) (TS = +25 C, Characteristic Impedance ZO = 50 , Unless Otherwise Noted) Capacitance Minimum Minimum Maximum Quality Typical Typical VBR IR CT 4.0 V CT 20.0 V Part Factor, Q, LS CP 10 A 17.6 V (pF) (pF) 4.0 V, (nH) (pF) (V) (nA) Min Max Min Max f = 50 MHz SMV2201-040LF 22 50 0.73 0.98 0.18 0.33 500 0.45 0.075 SMV2202-040LF 22 50 1.18 1.53 0.28 0.43 500 0.45 0.075 SMV2203-040LF 22 50 1.63 2.08 0.37 0.54 400 0.45 0.075 SMV2204-040LF 22 50 2.53 3.18 0.53 0.78 400 0.45 0.075 SMV2205-040LF 22 50 4.33 5.38 0.83 1.18 400 0.45 0.075 Note 1: Performance is guaranteed only under the conditions listed in this Table. Electrical and Mechanical Specifications varactors in the series are listed in Table 5 and illustrated in Figure 5. Package dimensions for the SMV2201-SMV2205 series The absolute maximum ratings of the SMV2201-SMV2205 series are provided in Figure 6. Tape and reel dimensions are provided in are provided in Table 1. Electrical specifications are provided in Figure 7. Table 2. Table 3 summarizes the capacitance for reverse voltages between 0 and 20 V. Typical performance characteristics of the SMV2201-SMV2205 Package and Handling Information SERIES are illustrated in Figures 1 and 2. Instructions on the shipping container label regarding exposure to The SPICE model for the SMV2201-SMV2205 varactors is shown moisture after the container seal is broken must be followed. in Figure 3 and the associated model parameters are provided in Otherwise, problems related to moisture absorption may occur Table 4. when the part is subjected to high temperature during solder assembly. Package Dimensions The PCB layout footprint for the SMV2201-SMV2205 series is provided in Figure 4. Typical case markings for each of the Skyworks Solutions, Inc. Phone 781 376-3000 Fax 781 376-3100 sales skyworksinc.com www.skyworksinc.com 2 May 23, 2012 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice 201953A