LE150S-VN 150W Single Output LED Driver Series Features High Efficiency (up to 93%) Wide Range Universal Input 90-305 VAC Active Power Factor Correction (0.99 typical) Constant Voltage Output Lightning Protection Waterproof (IP67) Overcurrent, Overvoltage, Overtemperature Protection Meets UL8750, UL935 & EN61347 Safety SELV 3 Year Warranty Description The LE150S-VN Series operate from a 90 ~ 305Vac input range. These units will provide up to a 150W of output power. They are designed to be highly efficient and highly reliable. The standard features include lightning protection, overvoltage protection, short circuit protection, and over temperature protection. Model Selection Model Output Output Efficiency* Ripple & Regulation Overvoltage Number Current Voltage 110Vac 220Vac Noise** Line Load Trip Level LE150S24VN 0 6.25A 24Vdc 89%-90% 92%-93% 2% of Vo pk-pk 110% - 130% of Vo 1% 2% LE150S48VN 0 3.13A 48Vdc 89%-90% 92%-93% 2% of Vo pk-pk 1% 2% 110% - 130% of Vo Notes: 1. Efficiency measured at full load, at input voltage noted. 2. Measured at 20MHz bandwidth, with noise probe directly across output terminals, and load terminated with 0.1F ceramic and 10F low ESR electrolytic capacitors. General Specifications 1.5 seconds, max. AC Input 90-305Vac, 47-63Hz, 1 Turn On Time Input Current 100Vac: 1.75A, 220Vac: 0.8A Hold-up Time 20 mSec Dimming Inrush Current 230Vac, cold start: will not exceed 65A N/A Function Overload Input Fuses XA, 250VAC fuses provided on all models 110%-180% of Io rated, Hiccup Mode Protection www.slpower.com LE150S-VN REV 2.0,11-FEB-2013 1 LE150S-VN 150W Single Output LED Driver Series General Specifications (continued) Earth Leakage Short Circuit <1.0mA 277Vac, 50Hz Provided - no damage to unit, self-recovery. Current Protection Latch mode. AC input will need to be reset to Overvoltage Efficiency See Models chart. return to normal operation after an OVP Protection condition. See chart for trip range. Latch mode. AC input will need to be reset to Overtemperature 150W continuous return to normal operation after an OTP Output Power Protection condition. Trip Temperature = 110C typical. Operating Operating: -35C to +70C Ripple and Noise See chart Temperature Non-operating: -40C to +85C 10% to 100% operating Output Voltage See chart Relative Humidity 5% to 100%, non-operating UL8750, UL935, UL1012, CSA-C22.2 No. 0, No. Total Regulation +/- 3%. See chart Safety Standards 107.1, & No. 250.0, EN61347-1, EN61347-2-13 261,000 hours (110Vac input, 80% load, 25C Dimensions W: 3.13 x L: 9.37 x H: 1.81 MTBF ambient, per MIL-HDBK-217F). 78,000 hours (220Vac input, 80% load, 60C Weight 1500g Lifetime case temperature). EMI/EMC Compliance Emissions EN55015, Radiated & Conducted EMI for Lighting Equipment EN61547 Static Discharge Immunity EN61000-4-2, 4kV Contact Discharge, 8kV air discharge EN61000-4-3 Radiated RF Immunity EFT/Burst Immunity EN61000-4-4 Line Surge Immunity EN61000-4-5, 4kV line-line, 6kV line-earth Conducted RF Immunity EN61000-4-6 Power Frequency Magnetic Field Immunity EN61000-4-8 Voltage Dip Immunity EN61000-4-11 EN61000-3-2 Line Harmonic Emissions EN61000-3-3 Flicker Test www.slpower.com LE150S-VN REV 2.0,11-FEB-2013 2