DSL05-024SC6 STMicroelectronics

DSL05 Secondary protection for VDSL2 and G.FAST lines Datasheet - production data Description DSL05 is designed to protect DSL line drivers against surges defined in worldwide telecommunication standards. This device protects line drivers of various systems such as xDSL and G.FAST. The low capacitance makes it suitable from ADSL to G.FAST data rates. DSL05 is able to survive severe conditions even when used with downgraded or oscillating gas tube. SOT23-6L This device is packaged in a SOT23-6L. Figure 1: Functional diagram Features High surge capability to comply with GR-1089 and ITU-T K20/21/45 I/O1 NC Keeps peak power capability at high temperature Voltages: 8, 12, 16 and 24 V -V +V LD LD Low capacitance device: C = 0.95 pF typ RoHS package Low leakage current: 50 nA at 25 C I/O2 NC Complies with the following standards Refer to Section 2:Schematic. Telcordia GR-1089 Table 1: Device summary 2.5 kV 2/10 s - 500 A 2/10 s AC power fault tests Order code VRM(V) ITU-T K20/21/45 DSL05-008SC6 8 6 kV 10/700 s - 150 A 5/310 s DSL05-012SC6 12 power induction and contact tests DSL05-016SC6 16 IEC 61000-4-2, level 4 15 kV (air discharge) DSL05-024SC6 24 8 kV (contact discharge) IEC 61000-4-5, level 2 1 kV, 42 MIL STD 883G-Method 3015-7: Class 3 8 kV (human body model) August 2017 DocID029116 Rev 3 1/10 www.st.com This is information on a product in full production. Characteristics DSL05 1 Characteristics Table 2: Absolute ratings (Tamb = -40 to 85 C) Symbol Parameter Value Unit Ipp Peak pulse current 8/20s 30 A dl/dt Critical rate of on-state current rise 1000 A/s Tstg Storage junction temperature range -55 to +150 C T Maximum operating junction temperature j TL Maximum temperature for soldering during 10 s 260 C Table 3: Electrical characteristics (Tamb = 25 C, pin 1 to pin 3) (1) (2) IRM at VRM VBR at 1 mA VBO IH C C Typ. Max. Typ. Max. Min. Max. Typ. Max. Typ. Order code T = 85 C amb nA V V V mA pF pF DSL05-008SC6 0.1 50 7 100 8 9.5 15 50 1.5 0.25 DSL05-012SC6 0.1 50 7 100 12 12.8 18 10 1.5 0.25 DSL05-016SC6 0.1 50 7 100 16 18 25 30 1.5 0.25 DSL05-024SC6 0.1 50 7 100 24 25.5 31 50 1.5 0.25 Notes: (1) Test conditions: V = 2 V bias, V = 1 V, f = 1 MHz R RMS (2) Measured between 1 V and VRM Figure 2: Electrical characteristics definitions 2/10 DocID029116 Rev 3