ESDZV5-1BU2 Datasheet Ultra low clamping single line bidirectional ESD protection Features Ultra low clamping voltage: 8 V (IEC 61000-4-2 contact discharge 8 kV at 30 ns/ 16 A TLP) Bidirectional device Low leakage current 0201 package ECOPACK2 compliant component 0201 package Complies with IEC 61000-4-2 level 4 30 kV (air discharge) 20 kV (contact discharge) Applications Where transient over voltage protection in ESD sensitive equipment is required, such as: Smartphones, mobile phones and accessories Tablets and notebooks Portable multimedia devices and accessories Wearable, home automation, healthcare Highly integrated systems Description Product status The ESDZV5-1BU2 is a bidirectional single line TVS diode designed to protect the ESDZV5-1BU2 data line or other I/O ports against ESD transients. The device is ideal for applications where reduced line capacitance and board space saving are required. DS12242 - Rev 3 - March 2020 www.st.com For further information contact your local STMicroelectronics sales office.ESDZV5-1BU2 Characteristics 1 Characteristics Table 1. Absolute maximun ratings (T = 25 C) amb Symbol Parameter Value Unit IEC 61000-4-2 contact discharge 20 V PP Peak pulse voltage kV IEC 61000-4-2 air discharge 30 P Peak pulse power dissipation (8/20 s) 70 W PP I Peak pulse current (8/20 s) 7 A PP T Operating junction temperature range -55 to +150 C j T Storage temperature range -65 to +150 C stg T Maximum lead temperature for soldering during 10 s 260 C L Figure 1. Electrical characteristics (definitions) I Parameter Symbol R D V Trigger voltage = Trig V Clamping voltage CL = V RM V V V I Leakage current V Trig V = CL RM RM H I RM V = Stand-off voltage RM I = Peak pulse current PP R Dynamic resistance = D V = Holding voltage H I PP C Input capacitance per line = LINE Table 2. Electrical characteristics (T = 25 C) amb Symbol Test condition Min. Typ. Max. Unit V Higher voltage than V guarantees the protection turn-on 5.8 10 V Trig Trig V Lower voltage than V guarantees the protection turn-off 4 4.7 V H H V 5.5 V RM (1) I V = 5.5 V 10 50 nA RM RM V 8 kV contact discharge after 30 ns, IEC 61000-4-2 8 V CL V 8/20 s waveform, I = 7 A 9 V CL PP C F = 1 MHz, V = 0 V, V = 30 mV 6 7.5 pF LINE LINE OSC R Pulse duration 100 ns 0.13 D 1. Application note: when used to protect a line connected to a DC source, the DC voltage must be lower than the minimum V H to enable the diode to return to its non-conducting state after the transient. DS12242 - Rev 3 page 2/12