EVALSPEAR310 STMicroelectronics

EVALSPEAr310 Evaluation board for SPEAr310 embedded MPU Data brief One HDLC-TDM port (8 Mb, 128 TS) Features Six serial ports (up to 115 kbaud) SPEAr310 embedded MPU 8 ADC channels (10-bit, 1 Msamples) Up to 2 Gbits DDR 2333 MHz (std 128 Mbytes) 6 GPIOs Up to 1.5 Gbytes parallel NOR Flash (std 16 JTAG debug port Mbytes) Up to 16 Mbytes serial NOR Flash memory (std Description 64 Mbytes) Up to 2 Gbits NAND Flash memory (std 64 The EVALSPEAr310 evaluation board allows you Mbytes) to quickly evaluate and debug software for the 2 SPEAr310. It acts as a learning tool to rapidly get 4 Kb Serial I C EEPROM familiar with the SPEAr310 features and provides 4 Mb SPI Flash memory a starting point for the development of the final Two USB 2.0 full Host port channels application board. It is equipped with most of the interfaces offered by the SPEAr310. The board is One USB 2.0 high speed Device equipped with one MII Ethernet port, four SMII One 10/100 Ethernet port based on MII PHY Ethernet ports, six RS232 ports, two HDLC based Four 10/100 Ethernet port based on SMII PHY RS485 ports and one E1/TDM port. Memory devices included are NAND Flash, parallel NOR One E1, 2x BNC/RJ48(2.048 Mbits) Flash, serial NOR Flash, and IC EEPROM. Two HDLC RS485 DB9 ports (up to 4 MHz) Figure 1. EVALSPEAr310 evaluation board September 2010 Doc ID 18018 Rev 1 1/3 For further information contact your local STMicroelectronics sales office. www.st.com 3Revision history EVALSPEAr310 Revision history Table 1. Document revision history Date Revision Changes 20-Sep-2010 1 Initial release. 2/3 Doc ID 18018 Rev 1