M74HC4316 QUAD BILATERAL SWITCH HIGH SPEED: t = 13ns (TYP.) at V = 6V PD CC LOW POWER DISSIPATION: I = 1A(MAX.) at V = 5V CC cc LOWO RESISTANCE: 120 TYP. (V - V = 2V) CC EE 50 TYP. (V - V = 4.5V) DIP SOP TSSOP CC EE 35 TYP. (V - V = 9V) CC EE WIDE ANALOG INPUT VOLTAGE RANGE 6v ORDER CODES LOW CROSSTALK BETWEEN SWITCHES PACKAGE TUBE T & R FAST SWITCHING DIP M74HC4316B1R SINE WAVE DISTORTION: SOP M74HC4316M1R M74HC4316RM13TR 0.020 at V - V = 9V CC EE TSSOP M74HC4316TTR HIGH NOISE IMMUNITY: V = V = 28 % V (MIN.) NIH NIL CC PIN AND FUNCTION COMPATIBLE WITH When the enable input is high, all four analog 74 SERIES 4316 switches are off. The supply voltage for the digital signals applied to V and GND must be whitin CC DESCRIPTION the range 0 to 6 V. The voltage swing on the analogue Inputs/Outputs can be between V The M74HC4316 is an high speed CMOS QUAD CC (positive limit) and V (negative limit). The BILATERAL SWITCH fabricated with silicon gate EE 2 voltage between V and V must not exceed C MOS technology. CC EE 12V. This device has four independent analogue All inputs are equipped with protection circuits switches. Each switch has two input/output against static discharge and transient excess terminals (nI/O, nO/I) and an active high select voltage. input (nC). PIN CONNECTION AND IEC LOGIC SYMBOLS July 2001 1/11M74HC4316 LOGIC DIAGRAM PIN DESCRIPTION PIN No SYMBOL NAME AND FUNCTION 1, 4, 10, 13 1 to 4 I/O Independent Inputs/Out- puts 2, 3, 11, 12 1 to 4 O/I Independent Outputs/ Inputs 7E Enable Inputs (Active LOW) 15, 5, 6, 14 1C to 4C Enable Inputs (Active High) 9V Negative Supply Voltage EE 8 GND Ground (0V) 16 V Positive Supply Voltage CC TRUTH TABLE E C SWITCH FUNCTION LH ON L L OFF H X OFF ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value Unit V Supply Voltage -0.5 to +7 V CC V - V Supply Voltage -0.5 to +13 V CC EE V Control Input Voltage -0.5 to V + 0.5 V I CC V Switch Input/Output Voltage V -0.5 to V + 0.5 V I/O EE CC I DC Input Diode Current 20 mA IK I DC Output Diode Current 20 mA OK I DC Output Source Sink Current Per Output Pin 25 mA O I or I DC V or Ground Current 50 mA CC GND CC P Power Dissipation 500(*) mW D T Storage Temperature -65 to +150 C stg T Lead Temperature (10 sec) 300 C L Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied (*) 500mW at 65 C derate to 300mW by 10mW/C from 65C to 85C 2/11