SPC563M64A176S STMicroelectronics

SPC564AADPT324S, SPC563MADPT144S, SPC563M64A176S Data brief SPC563Mxx, SPC564Axx microcontroller family evaluation board Features SPC560xx modular evaluation system On/off power switch with LED indicators Board power supply: 12 VDC external supply voltage Onboard STMicroelectronics L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target Two CAN channels with jumper enable One CAN channel with High-Speed transceiver and DB9 male connector One CAN channel with Low-Speed Fault Tolerant and High-Speed Product status link transceiver (selectable with jumpers) and DB9 male connector SPC564AADPT324S Up to two LIN channels with jumper enable SPC563MADPT144S One channel with transceiver and pin header connector populated One channel with footprints only SPC563M64A176S One SCI channel with jumper enables, transceiver and DB9 female connector Two FlexRay channels with jumper enables One channel with transceiver and DB9 male connector One channel with footprint only Four user push buttons with jumper enable and polarity selection Four user LEDs with jumper enables One potentiometer for analog voltage input Product summary Pin array for accessing all I/O signals Order code SPC564AADPT324S Expansion connectors for accessing all I/O signals Mini module for: Prototyping area with 0.1 spacing and SOIC footprint Reference (1) SPC564A80B4 Specifications: Board size 110 mm x 75 mm (SPC563Mxx) Order code SPC563MADPT144S Board size 120 mm x 95 mm (SPC564Axx) Mini module for: 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connectory Reference SPC563M60L5 and (1) Standard connectors to SPC56XXMB SPC563M64L5 Order code SPC563M64A176S Description Mini module for: The SPC564AADPT324S, SPC563MADPT144S and SPC563M64A176S are SPC563M60L7, Reference SPC563M64L7, evaluation systems supporting the STMicroelectronics SPC56xx family of automotive SPC564A70L7 and microprocessors. (1) SPC564A80L7 The complete system consists of an SPC56XXMB motherboard and a mini module Order code SPC56XXMB which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages. Mother board for SPC56xx Reference family of devices The evaluation system (motherboard and daughter card) allows full access to the CPU, all the CPU s I/O signals, and the motherboard peripherals (such as CAN, SCI 1. The MCU is not included, it must be and LIN). The mini modules itself can be used as a standalone unit when access to purchased separately. Please contact the I/O pins or peripherals is not needed. your sales representative for more details. The MCU is not included, it must be purchased separately. Please contact your sales representative for more details. DB1752 - Rev 3 - December 2019 www.st.com For further information contact your local STMicroelectronics sales office.SPC564AADPT324S, SPC563MADPT144S, SPC563M64A176S Revision history Table 1. Document revision history Date Version Changes Initial release. 20-Sep-2012 1 SPC564AADPT324S was previously in document DM00044221 (DocID 022591) revision 1. 17-Sep-2012 2 Updated disclaimer. Updated features in cover page. 16-Dec-2019 3 Added product status link table and product summary table. Minor text changes. DB1752 - Rev 3 page 2/3