SPDCPOE03 STMicroelectronics

SPDCPOE03 Power over ethernet 10 W module Preliminary data Features Input voltage range: 38.5 V to 60 V 10 W output Based on ST devices integrating standard PoE interface and current mode PVM controller IEEE 802.3af compliant (PoE standard) Class 0 (zero), 0-12.96 W input Output voltage 3.3 V Output current 3 A Output voltage 5 % Applications Ripple 1 % rms The target applications are small low power Transient response 5 %, load to full load remote IP appliances. Operating temperature range -40 C to 70 C Security system, doors access, cameras, Input transient suppressor alarms Under voltage lockout Displays Soft-start Public address systems Short circuit protection Wireless access point 1500 VDC input/output insulation Environmental control Input and output will be normally maintained Telemetry within SELV limit Remote environmental monitoring Very compact size, about 86x24.2x17 mm Vertical THT package RoHS compliant UL 94V-0 flammability Table 1. Device summary Order code Nominal input voltage Nominal output voltage Max efficiency Nominal power SPDCPOE03 48 V 3.3 V TBD % 10 W March 2009 Rev 1 1/6 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to www.st.com 6 change without notice. Obsolete Product(s) - Obsolete Product(s)Description SPDCPOE03 1 Description SPDCPOE03 is a power module specifically designed to provide an isolated, low-voltage power source to a remote powered device (PD) in power over ethernet (PoE) applications. SPDCPOE03 has full functional compliance with IEEE802.3af. It is designed to extract power from Ethernet cable when sourced by power sourcing equipment (PSE) also conforming to IEEE802.3af. SPDCPOE03 is rated 10 W and incorporate PD detection and PD classification current signatures required for the PSE. The module is compatible with PD classifications class 0. In addition to a fully integrated DC-DC converter, each SPDCPOE03 power module incorporates internal input diode bridges to support both data line and spare line pair standard ethernet connections, a transient suppressor for input over-voltage protection, and an EMI filter to ensure noise compatibility with Ethernet data signals. Other features include: input under voltage lockout (UVLO), soft-start, over-current and short- circuit protection. Table 2. Pin description No Pin name I/O Description J1-1 TX + I Ethernet in data line J1-2 TX - I Ethernet in data line J1-3 RX + I Ethernet in data line J1-4 SP1 I Ethernet in spare line J1-5 SP1 I Ethernet in spare line J1-6 RX - I Ethernet in data line J1-7 SP2 I Ethernet in spare line J1-8 SP2 I Ethernet in spare line J2-1 TD + O Ethernet out data line J2-2 TD - O Ethernet out data line J2-3 RD + O Ethernet out data line J2-4 n.c. J2-5 n.c. J2-6 RD- O Ethernet out data line J2-7 n.c. J2-8 n.c. J3-1 Vout + O Power output +3.3 Volt J3-2 Vout + O Power output +3.3 Volt J3-3 Vout - O Power output 0 Volt J3-4 Vout - O Power output 0 Volt 2/6 Rev 1 Obsolete Product(s) - Obsolete Product(s)