ST introduces the STA329, an easy to be managed (I2C controlled), all-in-one (processor + amplifier) Sound Terminal Sound Terminals are high performance, integrated single chips capable of digitally processing and amplifying audio signals maintaining a fully digital format from source to speaker, thus reducing the BOM, the design costs, the footprint area and at the same time improving the clarity of the sound. Whether you are designing a high-power single channel product, a mid-power stereo application or a typical 2.1 audio system, the STA329 is definitively the most recommended choice. It has got all it takes to help you develop a quick, simple and powerful design. In a typical audio home system the audio is stored and transmitted in digital form (I2S), digitally processed, converted to pulse-width-modulated signals (PWM) and then amplified and sent to the speakers. STA329s silicon does exactly all this thanks to its triple core: a powerful digital sound processor (DSP) a FFX cell (Full Flexible Amplification - ST proprietary technology) for digital low distortion, low noise PCM-to-PWM conversion the worlds most efficient class D power stage High quality audio systems with low bill-of-material costs can be done with STA329 and its full suite of audio quality enhancing features such as tone and volume control, loudness, dynamic range compression, independently programmable limiters/compressors and equalization (audio presets galore and four 28 bit user programmable biquads per channel are always available). This makes unnecessary to resort to external discrete devices to support these capabilities. Developers will have full and intuitive control of the audio processing step thanks to a graphical development environment tool called APWorkbench. The ever increasing demand for environment friendly products and the related energy consumption issue have been lately brought to the attention of regulatory bodies (European Code of Conduct and Energy Star Program among others) and of the consumer market. The unique FFX modulator of STA329 greatly increases the efficiency not only at maximum dynamic but at listening dynamic as well (that is how STA329 is being used most of the time) resulting in very little energy loss when the device is active, while when STA329 is not in function the available stand-by feature reduces to the minimum the waste of energy. STA329 and its kindred STA328 and STA326 come in a small surface mounted package PSO36. STA329 is pin-to-pin and is also software compatible with STA326 and STA328. All these devices are designed to effectively work within a wide single power supply voltage range (10V - to 36V) and can provide the most requested output power configurations. This is so because STA329s power section consists of four independent half bridges that can be configured via digital control to work single-ended, bridge-tied-load (BTL) and parallel BTL (PBTL - using all of the amplifiers to drive a subwoofer). The available post-scale feature and limiter allow the designer to vary the output power of STA329 keeping the operative conditions, the external components and the speakers unchanged.