STEVAL-IPMM10B Data brief 1200 W motor control power board based on STIB1060DM2T-L SLLIMM 2nd series MOSFET IPM Features Input voltage: 125 - 400 VDC Nominal power: up to 1200 W Allowable maximum power is related to the application conditions and cooling system Nominal current: up to 4.2 A rms Input auxiliary voltage: up to 20 V DC Single- or three-shunt resistors for current sensing (with sensing network) Two options for current sensing: dedicated op-amps or through MCU Overcurrent hardware protection IPM temperature monitoring and protection Hall sensor or encoder input MOSFET intelligent power module: SLLIMM 2nd series IPM (STIB1060DM2T-L - DBC package) Motor control connector (32-pin) to interface with ST MCU boards Universal conception for further evaluation with breadboard and testing pins Very compact size WEEE compliant RoHS compliant Product summary Description 1200 W motor The STEVAL-IPMM10B is a compact motor drive power board equipped with the control power SLLIMM (small low-loss intelligent molded module) 2nd series module 2nd series n- board based on channel super junction MDmesh DM2 fast-recovery diode (STIB1060DM2T-L). It STIB1060DM2T- STEVAL-IPMM10B provides an affordable, easy-to-use solution for driving high power motors for a wide L SLLIMM 2nd series range of applications such as white goods, air conditioners, compressors, power MOSFET IPM fans, high-end power tools, and generally 3-phase inverters for motor drives. SLLIMM 2nd The IPM itself consists of MOSFETs and a wide range of features including series IPM, 3- undervoltage lockout, smart shutdown, temperature sensing and NTC inside, and phase inverter, overcurrent protection. STIB1060DM2T-L 0.18 typ., 10 A, 600 V Power The main characteristics of this evaluation board are its small size, minimal BOM and MOSFET high efficiency. It consists of an interface circuit (BUS and V connectors), bootstrap CC capacitors, snubber capacitor, hardware short-circuit protection, fault event signal Featured STPOWER SLLIMM and temperature monitoring. It is designed to work in single or three-shunt technologies configuration and with two current sensing options: three dedicated op-amps on the STM32 MCSDK Development evaluation board, or op-amps available on a connected microcontroller. A Hall/ environments STSW-POWERSTUDIO Encoder section completes the circuit. PMSM / BLDC Motor The system is designed to achieve accurate and fast conditioning of current feedback Applications to satisfy the typical requirements for field-oriented control (FOC). 3-phase Induction Motor The STEVAL-IPMM10B is compatible with ST control boards based on STM32 microcontrollers, providing a complete platform for motor control. DB4140 - Rev 1 - April 2020 www.st.com For further information contact your local STMicroelectronics sales office.STEVAL-IPMM10B Schematic diagrams DB4140 - Rev 1 page 2/8 1 Schematic diagrams Figure 1. STEVAL-IPMM10B board schematic (1 of 5) Input DC bus voltage +Bus 3.3V R1 R5 470K U1D 1k0 3.3V INPUT-dc 12 + 14 C1 R2 D1 2 1.65V + 470K 13 BAT48JFILM - 1 + + 1000u/400V C3 R6 C4 J1 47u/35V 47u/35V 1k0 Bus voltage TSV994 R3 120R R4 C2 10n 7k5 STEVAL-IPMlnmx decoder RC1 RC2 RC3 L 0 0 0 RC4 RC5 RC6 RC7 N 0 0 0 0 RC8 RC9 RC10 RC11 M 0 0 0 0 RC12 RC13 X 0 0 11 4