STEVAL-PCC004V1 STMicroelectronics

STEVAL-PCC004V1 Low-speed USB demonstration board based on the STUSB02E transceiver and ST7263BE2 microcontroller Data Brief Features Hardware Based on STUSB02E, single-chip USB transceivers that support both USB full- speed and USB low-speed operations. USB to mini-B cable Software USB HID demonstration GUI Description For demonstration purposes, the USB microcontroller used is the ST72F63BE2 8-bit microcontroller. The STUSB03 connected to a USB controller is ideal for use in mobile phones, digital cameras, printers, PDAs, etc. All hardware STEVAL-PCC004V1 components except the transceiver IC are the same for the STEVAL-PCC003V1 and STEVAL- PCC004V1 demonstration boards. The demonstration board is comprised of one mini-B USB connector, a USB controller, a USB transceiver, two 2-to-4 demultiplexers and all required discrete components (pull-up resistors, series resistors and power supply capacitors). The device can be configured through a set of jumpers and the main signals can be accessed through test points. The demonstration board is powered from a USB mini-B or, optionally, from an external supply. The transceiver STUSB02 is connected at the USB communication lines of the microcontroller. August 2008 Rev 1 1/4 For further information contact your local STMicroelectronics sales office. www.st.com 4 Obsolete Product(s) - Obsolete Product(s)Circuit schematic STEVAL-PCC004V1 1 Circuit schematic Figure 1. Schematic diagram 2/4 Obsolete Product(s) - Obsolete Product(s)