STG3692 Datasheet Low voltage high bandwidth quad SPDT switch Features Ultra low power dissipation: QFN16L I = 3 A at T = 85 C CC A (2.6x1.8 mm) Low on-resistance: R = 4.6 (T = 25 C) at V = 4.3 V DS(on) A CC R = 5.8 (T = 25 C) at V = 3.0 V DS(on) A CC Wide operating voltage range: V (opr) = 1.65 V to 4.3 V single supply CC 4.3 V tolerant and 1.8 V compatible threshold on digital control input at V = CC 2.3 V to 3.0 V Typical bandwidth (-3 dB) at 500 MHz on all channels Latch-up performance exceeds 100 mA per JESD 78, Class II ESD performance exceeds JESD22 2000-V human body model (A114-A) USB (2.0) high speed (480 Mbps) signal switching compliant Description The STG3692 is a high-speed CMOS low voltage quad analog SPDT (single pole dual throw) switch or 2:1 multiplexer /demultiplexer switch developed in silicon gate Product status link C2MOS technology. It is designed to operate from 1.65 V to 4.3 V, making this device ideal for portable applications. STG3692 The nSEL inputs are provided to control the switch. The switch S1 is ON (connected to common ports Dn) when the nSEL input is held high and OFF (high impedance state exists between the two ports) when SEL is held low the switch S2 is ON Product summary (connected to common port D) when the nSEL input is held low and OFF (high Order code STG3692QTR impedance state exists between the two ports) when nSEL is held high. Additional key features are fast switching speed, break-before-make delay time and ultra low Package QFN16L (2.6x1.8 mm) power consumption. All inputs and outputs are equipped with protection circuits Packing Tape and reel against static discharge, giving them ESD immunity and transient excess voltage. DS4909 - Rev 9 - December 2021 www.st.com For further information contact your local STMicroelectronics sales office.STG3692 Pin settings 1 Pin settings 1.1 Pin connections Figure 1. Pin connection (top through view) 4S2 1S1 D4 D1 15 14 16 13 1 1S2 12 4S1 11 2 GND V CC 3 10 3-4SEL 1-2SEL 4 2S1 9 3S2 7 5 6 8 D2 D3 2S2 3S1 1.2 Pin description Table 1. Pin description Pin Symbol Name and function 15, 1 1S1, 1S2 4, 6 2S1, 2S2 Independent channels 7, 9 3S1, 3S2 12, 14 4S1, 4S2 16, 5, 8, 13 D1, D2, D3, D4 Common channels 3, 10 1-2SEL, 3-4SEL Control 2 V Positive supply voltage CC 11 GND Ground (0 V) Note: Exposed pad must be soldered to a floating plane. Do not connect to power or ground. DS4909 - Rev 9 page 2/20