STM32H747I-DISC1 STMicroelectronics

STM32H747I-DISCO Discovery kit with STM32H747XI MCU Data brief Features STM32H747XIH6 Arm -based microcontroller with 2 Mbytes of Flash memory and 1 Mbyte of RAM in TFBGA240 + 25 package 4 capacitive touch LCD display module with MIPI DSI interface (STM32H747I-DISCO order code only) Ethernet compliant with IEEE802.3-2002 USB OTG HS STM32H747I-DISCO (top view) SAI audio codec ST-MEMS digital microphones 2 x 512-Mbit Quad-SPI NOR Flash memory 256-Mbit SDRAM 4 color user LEDs 1 user and reset push-button 4-direction joystick with selection button Fanout daughterboard STM32H747I-DISC1 (top view) Board connectors: Camera (8-bit) USB with Micro-AB Ethernet RJ45 SPDIF RCA input and output Stereo headset jack including analog microphone input Audio jack for external speakers microSD card TAG-Connect 10-pin footprint STM32H747I-DISCO (bottom view) Arm Cortex 10-pin 1.27 mm-pitch debug Pictures are not contractual. PCB colors may differ. connector over STDC14 footprint On-board STLINK-V3E debugger/programmer Board expansion connectors: with USB re-enumeration capability: mass Arduino Uno V3 storage, Virtual COM port and debug port Pmod Type 2A and Type 4A Comprehensive free software libraries and STMod+ examples available with the STM32Cube MCU Audio daughterboard Package Flexible power-supply options: Support of a wide choice of integrated ST-LINK USB V , USB OTG HS development environments (IDEs), including BUS connector, or external sources IAR, Keil and GCC-based IDEs March 2019 DB3608 Rev 2 1/5 For further information contact your local STMicroelectronics sales office. www.st.comDescription STM32H747I-DISCO Description The STM32H747I-DISCO Discovery kit is a complete demonstration and development platform for STMicroelectronics STM32H747XIH6 microcontroller, designed to simplify user application development. STM32H747I-DISC1 is the subset of STM32H747I-DISCO without the LCD display module. The full range of hardware features available on the boards helps users improve application development by an evaluation of all the peripherals (USB OTG HS, Ethernet, microSD card, SAI Audio DAC stereo with audio jack input and output, MEMS digital microphone, SDRAM, Quad-SPI Flash, DCMI connector, MIPI DSI interface, and others). Arduino Uno V3 and Pmod/STMod+ connectors provide easy connection to extension shields or daughterboards for specific applications. STLINK-V3E is integrated into the board, as the embedded in-circuit debugger and programmer for the STM32 MCU and USB Virtual COM port bridge. Ordering information To order the STM32H747I-DISCO or STM32H747I-DISC1 Discovery kit, refer to Table 1. Table 1. Ordering information Order code Board reference User manual Target STM32 Differentiating feature MB1248 STM32H747I-DISCO STM32H747XIH6U With LCD module (1) MB1166 UM2411 STM32H747I-DISC1 MB1248 STM32H747XIH6U No LCD module 1. LCD extension board. Product marking Evaluation tools marked as ES or E are not yet qualified and are therefore not ready to be used as reference design or in production. Any consequences arising from such usage will not be at STMicroelectronics charge. In no event will STMicroelectronics be liable for any customer usage of these engineering sample tools as reference designs or in production. E or ES marking examples of location: on the targeted STM32 that is soldered on the board (for illustration of STM32 marking, refer to the section Package information in the STM32 datasheet at www.st.com). next to the evaluation tool ordering part number, that is stuck or silkscreen printed on the board The boards feature a specific STM32 device version, which allows the operation of any bundled commercial stack/library available. This STM32 device shows a marking option at the end of the standard part number and is not available for sales. 2/5 DB3608 Rev 2