STM32H7B3I-DK Data brief Discovery kit with STM32H7B3LI MCU Features STM32H7B3LIH6QU Arm -based microcontroller featuring 2 Mbytes of Flash memory and 1.4 Mbyte of RAM in BGA225 package 4.3 (480x272 pixels) TFT color LCD module including a capacitive touch panel with RGB interface WiFi module compliant with 802.11 b/g/n USB OTG HS Audio codec 512-Mbit Octo-SPI NOR Flash memory 128-Mbit SDRAM 2 user LEDs User and Reset push-buttons STM32H7B3I-DK board top and Fanout daughterboard bottom views. Fanout board not 1x FDCAN shown. Pictures are not contractual. Board connectors: Camera (8 bit) USB with Micro-AB Stereo headset jack including analog microphone input Audio jack for external speakers microSD card TAG-Connect 10-pin footprint Product status link Arm Cortex 10-pin 1.27mm-pitch debug connector over STDC14 footprint STM32H7B3I-DK ARDUINO Uno V3 expansion connector STMod+ expansion connector Audio daughterboard expansion connector 2 External I C expansion connector Flexible power-supply options: ST-LINK USB V , USB OTG HS connector, or external sources BUS On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port Comprehensive free software libraries and examples available with the STM32Cube MCU Package Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil , and GCC-based IDEs DB3894 - Rev 1 - December 2019 www.st.com For further information contact your local STMicroelectronics sales office.STM32H7B3I-DK Description The STM32H7B3I-DK Discovery kit is a complete demonstration and development platform for STMicroelectronics Arm Cortex -M7 core-based STM32H7B3LIH6QU microcontroller. The STM32H7B3I-DK Discovery kit is used as a reference design for user application development before porting to the final product, thus simplifying the application development. The full range of hardware features available on the board helps users enhance their application development by an evaluation of almost all peripherals (such as USB OTG HS, microSD, USART, FDCAN, audio DAC stereo with audio jack input and output, camera, SDRAM, Octo-SPI Flash memory and RGB interface LCD with capacitive touch panel). ARDUINO Uno V3 connectors provide easy connection to extension shields or daughterboards for specific applications. STLINK-V3E is integrated into the board, as an embedded in-circuit debugger and programmer for the STM32 MCU and the USB Virtual COM port bridge. The STM32H7B3I-DK board comes with the STM32CubeH7 MCU Package, which provides an STM32 comprehensive software HAL library as well as various software examples. DB3894 - Rev 1 page 2/6