STM32L4P5G-DK Data brief Discovery kit with STM32L4P5AG MCU Features STM32L4P5AGI6PU Arm Cortex core-based microcontroller featuring 1 Mbyte of Flash memory and 320 Kbytes of RAM in UFBGA169 package 240x240 64-bit color LCD with RGB interface (connector only) 4-Gbyte onboard eMMC On-board current measurement SAI audio codec (footprint only) ST-MEMS digital microphone (footprint only) 512-Mbit Octo-SPI NOR Flash memory with DDR mode 64-Mbit Octo-SPI PSRAM memory with DDR mode 2 user LEDs Reset buttons 4-direction joystick with a selection button Board connectors: Camera (8-bit) (footprint only) Stereo headset jack (footprint only) USB with Micro-AB User interface through USB Virtual COM port STM32L4P5G-DK top view. Picture is Arm Cortex 10-pin 1.27 mm-pitch debug connector over STDC14 not contractual. footprint Product status link ARDUINO Uno V3 expansion connector STM32L4P5G-DK STMod+ expansion connector Flexible power-supply options: ST-LINK USB V , USB OTG connector, or external sources BUS On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port Microcontroller supply voltage: fixed 3.3 V and extern SMPS to generate Vcore logic supply Comprehensive free software libraries and examples available with the STM32CubeL4 MCU Package Support of a wide choice of Integrated Development Environments (IDEs) including IAR , Keil , and GCC-based IDEs DB4072 - Rev 1 - November 2019 www.st.com For further information contact your local STMicroelectronics sales office.STM32L4P5G-DK Description The STM32L4P5G-DK Discovery kit is a complete demonstration and development platform for the STMicroelectronics Arm Cortex -M4 core-based 2 STM32L4P5AGI6PU microcontroller with four I C buses, three SPI and six USART ports, CAN port, two SAI ports, 12-bit ADC, 12-bit DAC, internal 320-Kbyte SRAM and 1-Mbyte Flash memory, two Octo-SPI memory interfaces, touch-sensing capability, USB OTG FS port, LCD-TFT controller, flexible memory controller (FMC), 8- to 14-bit DCMI interface and JTAG debugging support. The STM32L4P5G-DK Discovery kit is used as a reference design for user application development before porting to the final product. The full range of hardware features on the board helps the user to evaluate all the peripherals (USB OTG FS, Octo-SPI Flash and PSRAM memory device, eMMC, and others) and to develop applications. The ARDUINO Uno V3 and STMod+ connectors provide easy connection to extension shields or daughterboards for specific applications. STLINK-V3E is integrated into the board, as an embedded in-circuit debugger and programmer for the STM32 MCU and the USB Virtual COM port bridge. DB4072 - Rev 1 page 2/6