STPS2200U STMicroelectronics

STPS2200 Power Schottky diode Datasheet production data Features K A Low forward voltage drop Very small conduction losses A Negligible switching losses Extremely fast switching Low thermal resistance K -40C minimum operating T j SMB STPS2200U ECOPACK 2 compliant component A Description This device is a 200 V Schottky rectifier suited for switch mode power supplies and high frequency K DC to DC converters. SMBflat Packaged in SMB, SMBflat, this device is STPS2200UF especially intended for use in low voltage, high frequency inverters, freewheeling and polarity Table 1. Device summary protection. Also ideal for all LED lighting Symbol Value applications. I 2 A F(AV) V 200 V RRM T 175 C j(max) V 0.58 V F(typ) April 2013 DocID024381 Rev 1 1/9 This is information on a product in full production. www.st.com 9Characteristics STPS2200 1 Characteristics Table 2. Absolute ratings (limiting values, at 25 C unless otherwise stated) Symbol Parameter Value Unit V Repetitive peak reverse voltage 200 V RRM I Forward rms current 10 A F(RMS) SMB T = 145 C l I Average forward current = 0.5, square wave 2A F(AV) SMBflat T = 150 C l I Surge non repetitive forward current t = 10 ms sinusoidal, T = 25 C 100 A FSM p l T Storage temperature range -65 to +175 C stg T Operating junction temperature range -40 to +175 C j Table 3. Thermal parameters Symbol Parameter Value Unit SMB 20 R Junction to lead C/W th(j-l) SMBflat 15 Table 4. Static electrical characteristics Symbol Test conditions Min. Typ. Max. Unit T = 25 C 5A j (1) I Reverse leakage current V = V R R RRM T = 125 C 0.7 2.5 mA j V T = 25 C 0.73 0.80 j (1) V Forward voltage drop I = 2 A F F V T = 125 C 0.58 0.64 j 1. Pulse test: t = 380 s, < 2% p To evaluate the maximum conduction losses use the following equation: 2 P = 0.58 x I + 0.03 I F(AV) F (RMS) Note: More information is available in the application notes: AN604 Calculation of conduction losses in a power rectifier AN4021 Calculation of reverse losses in a power diode 2/9 DocID024381 Rev 1