STTH1R02ZF Ultrafast rectifier Datasheet - production data Description The STTH1R02ZF is an ultrafast recovery A K rectifier used for energy recovery in switched mode power supplies, switching mode base drive and transistor circuits. Packaged in SOD123Flat, this device is intended for use in low voltage, high A frequency inverters, free-wheeling and polarity protection. K The compromise between forward voltage drop and recovery time offers optimized performances. SOD123Flat Table 1: Device summary Symbol Value I 1 A F(AV) Features VRRM 200 V Very low conduction losses Tj (max.) 175 C High surge capability VF (typ.) 0.75 V Negligible switching losses Low forward and reverse recovery times t (typ.) 25 ns rr High junction temperature ECOPACK 2 compliant component Surface mount miniature packages February 2017 DocID030263 Rev 1 1/8 www.st.com This is information on a product in full production. Characteristics STTH1R02ZF 1 Characteristics Table 2: Absolute ratings (limiting values at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 200 V I Average forward current T = 153 C , = 0.5 square wave 1 A F(AV) lead Surge non repetitive forward I t = 10 ms sinusoidal 25 A FSM p current T Storage temperature range -65 to +175 C stg Tj Maximum operating junction temperature +175 C Table 3: Thermal parameter Symbol Parameter Maximum Unit Rth(j-l) Junction to lead 23 C/W Table 4: Static electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit Tj = 25 C - 0.5 A (1) IR Reverse leakage current VR = VRRM T = 125 C - 1 10 A j Tj = 25 C - 0.87 1.00 (2) VF Forward voltage drop IF = 1 A V T = 125 C - 0.75 0.85 j Notes: (1) Pulse test: tp = 5 ms, < 2% (2) Pulse test: tp = 380 s, < 2% To evaluate the conduction losses, use the following equation: 2 P = 0.75 x I + 0.1 x I F(AV) F (RMS) Table 5: Dynamic electrical characteristics Symbol Parameters Test conditions Min. Typ. Max. Unit IF = 1 A dIF/dt = 50 A/s - 25 32 VR = 30 V trr Reverse recovery time ns Tj = 25 C I = 1 A - 30 F dI /dt = 100 A/s F IRM Reverse recovery current - 2.2 A V = 160 V R Q Reverse recovery charges - 34 nC rr T = 125 C j 2/8 DocID030263 Rev 1