X-NUCLEO-IDB05A1 STMicroelectronics

X - N U C L E O - I D B 0 5 A 1 Bluetooth Low Energy expansion board based on the SPBTLE- RF module for STM32 Nucleo Data brief Description The X-NUCLEO-IDB05A1 is a Bluetooth Low Energy evaluation board based on the SPBTLE- RF BlueNRG-MS RF module to allow expansion of the STM32 Nucleo boards. The SPBTLE-RF module is FCC (FCC ID: S9NSPBTLERF) and IC certified (IC: 8976C-SPBTLERF). The X-NUCLEO-IDB05A1 is compatible with the ST Morpho and Arduino UNO R3 connector layout (the user can mount the ST Morpho connectors, if required). The X-NUCLEO- IDB05A1 interfaces with the STM32 microcontroller via the SPI pin, and the user can change the default SPI clock, the SPI chip select and SPI IRQ by changing one resistor on the evaluation board. Features STM32 expansion board based on the SPBTLE-RF module for STM32 Nucleo X-NUCLEO-IDB05A1 contains FCC and IC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF and IC: 8976C-SPBTLERF) SPBTLE-RF: Bluetooth Low Energy FCC and IC certified module based on Bluetooth SMART 4.1 network processor BlueNRG-MS Integrated Balun (BALF-NRG-01D3) Chip antenna Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connector Scalable solution, capable of cascading multiple boards for larger systems Free comprehensive development firmware library and example for BlueNRG-MS, compatible with STM32Cube firmware RoHS compliant July 2015 DocID027862 Rev 1.0 1/7 www.st.com For further information contact your local STMicroelectronics sales office Formal notices required by the U.S. Federal X-NUCLEO-IDB05A1 Communications Commission FC) 1 Formal notices required by the U.S. Federal Communications Commission FC) Any changes or modifications to this equipment not expressly approved by STMicroelectronics may cause harmful interference and void the users authorization to operate this equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation. This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). The X-NUCLEO-IDB05A1 contains FCC certified module SPBTLE-RF (FCC ID: S9NSPBTLERF). 2/7 DocID027862 Rev 1.0