PGSMAJ33AHR3G Taiwan Semiconductor

PGSMAJ10A - PGSMAJ100A Taiwan Semiconductor 400W, 10V - 100V Surface Mount Transient Voltage Suppressor FEATURES KEY PARAMETERS AEC-Q101 qualified PARAMETER VALUE UNIT Low profile package V 10 - 100 V WM Photo Glass passivated junction Excellent clamping capability V 11.7 - 117 V BR Moisture sensitivity level: level 1, per J-STD-020 T 175 C J MAX 400 watts peak pulse power capability with a 10 / 1000 s Package DO-214AC (SMA) waveform (300W above 78V) Configuration Single die Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free according to IEC 61249-2-21 APPLICATIONS Switching mode power supply (SMPS) Adapters Lighting application On-board DC/DC converter MECHANICAL DATA Case: DO-214AC (SMA) DO-214AC (SMA) Molding compound meets UL 94V-0 flammability rating Terminal: Matte tin plated leads, solderable per J-STD-002 Meet JESD 201 class 2 whisker test Polarity: As marked Weight: 0.06 g (approximately) ABSOLUTE MAXIMUM RATINGS (T = 25C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Peak power dissipation (Note 1) P 400 W PPM Steady state power dissipation P 1 W D Peak forward surge current, 8.3 ms single half sine-wave I 40 A FSM superimposed on rated load Maximum instantaneous forward voltage at 25 A for V 3.5 V F unidirectional only Operating junction temperature range T -55 to +175 C J Storage temperature range T -55 to +175 C STG Notes: 1. Non-repetitive Current Pulse Per Fig.3 and derated above T =25C Per Fig.2. Rating is 300 W for V > 78 V A WM Devices for Bi-directional Applications 1. For Bi-directional use CA suffix (e.g. PGSMAJ10CA). 2. Electrical Characteristics Apply in Both Directions 1 Version:B1805 Not Recommended PGSMAJ10A - PGSMAJ100A Taiwan Semiconductor THERMAL PERFORMANCE PARAMETER SYMBOL TYP. UNIT Junction-to-lead thermal resistance per diode R 29 C/W JL Junction-to-ambient thermal resistance per diode R 120 C/W JA Junction-to-case thermal resistance per diode R 31 C/W JC Thermal Performance Note: Units mounted on PCB (5mm x 5mm Cu pad test board) ELECTRICAL SPECIFICATIONS (T = 25C unless otherwise noted) A Breakdown Working Maximum reverse voltage Maximum peak Maximum clamping Test current stand-off leakage current V I Marking BR T impulse current voltage Part number I voltage I V T R WM (V) code I (A) V I (V) PPM C PPM (mA) V (A) WM (Note 1) tp =10/1000 s tp =10/1000 s (V) (Note 1) Min. Max. PGSMAJ10A PAX 11.1 12.30 1 10 5 23.5 17.0 PGSMAJ11A PAZ 12.2 13.50 1 11 1 22.0 18.2 PGSMAJ12A PBE 13.3 14.70 1 12 1 20.1 19.9 PGSMAJ13A PBG 14.4 15.90 1 13 1 18.6 21.5 PGSMAJ14A PBK 15.6 17.20 1 14 1 17.2 23.2 PGSMAJ15A PBM 16.7 18.50 1 15 1 16.4 24.4 PGSMAJ16A PBP 17.8 19.70 1 16 1 15.4 26.0 PGSMAJ17A PBR 18.9 20.90 1 17 1 14.5 27.6 PGSMAJ18A PBT 20.0 22.10 1 18 1 13.7 29.2 PGSMAJ20A PBV 22.2 24.50 1 20 1 12.3 32.4 PGSMAJ22A PBX 24.4 26.90 1 22 1 11.3 35.5 PGSMAJ24A PBZ 26.7 29.50 1 24 1 10.3 38.9 PGSMAJ26A PCE 28.9 31.90 1 26 1 9.5 42.1 PGSMAJ28A PCG 31.1 34.40 1 28 1 8.8 45.4 PGSMAJ30A PCK 33.3 36.8 1 30 1 8.3 48.4 PGSMAJ33A PCM 36.7 40.6 1 33 1 7.5 53.3 PGSMAJ36A PCP 40.0 44.2 1 36 1 6.9 58.1 PGSMAJ40A PCR 44.4 49.1 1 40 1 6.2 64.5 PGSMAJ43A PCT 47.8 52.8 1 43 1 5.8 69.4 PGSMAJ45A PCV 50.0 55.3 1 45 1 5.5 72.7 PGSMAJ48A PCX 53.3 58.9 1 48 1 5.2 77.4 PGSMAJ51A PCZ 56.7 62.7 1 51 1 4.9 82.4 PGSMAJ54A PRE 60.0 66.3 1 54 1 4.6 87.1 PGSMAJ58A PRG 64.4 71.2 1 58 1 4.3 93.6 PGSMAJ60A PRK 66.7 73.7 1 60 1 4.1 96.8 PGSMAJ64A PRM 71.1 78.6 1 64 1 3.9 103 PGSMAJ70A PRP 77.8 86 1 70 1 3.5 113 PGSMAJ75A PRR 83.3 92.1 1 75 1 3.3 121 PGSMAJ78A PRT 86.7 95.8 1 78 1 3.2 126 PGSMAJ85A PRV 94.4 104 1 85 1 2.2 137 PGSMAJ90A PRX 100 111 1 90 1 2.1 146 PGSMAJ100A PRZ 111 123 1 100 1 1.9 162 Notes: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25C per Fig. 2 2. Mounted on 5 x 5mm copper pads to each terminal 3. Lead temperature at T =75C L 4. Measure on 8.3ms single half sine-wave duty cycle=4 pulses per minutes maximum 5. Peak pulse power waveform is 10/1000 s 2 Version:B1805 Not Recommended