DPP120-240 Series 120W & 240W DIN Rail Mount Power Supplies Features Low Cost 12V, 24V or 48V Outputs Auto-ranging input (no manual switching) Parallel Function Switch (2) -40 to +71C Operation Key Market Segments & Applications Speci cations Model DPP120-xx-1 DPP240-xx-1 AC Input Voltage range VAC 93 - 132 / 186 - 264VAC, single phase. Auto select Input Frequency Hz 47 - 63Hz DC Input Voltage range VDC 210 - 370VDC* Inrush Current (115 / 230VAC) A 24 / 48A 30 / 60A Power Factor - Meets EN61000-3-2 Input Current (115 / 230VAC) A 2.8 / 1.4A 5.4 / 2.2A Leakage Current mA 3.5mA Output Voltage Accuracy % -0, +1% of Nominal Line Regulation % 0.5% Load Regulation % 1% (5% when set in parallel mode) Ripple and Noise (20MHz BW) mV 50mV 100mV Overcurrent Protection (Typ) - 110 - 145% Overvoltage Protection V See model selector Overtemperature Protection - - Hold Up Time (230VAC input) ms > 30ms Parallel operation - Set in parallel (droop) mode - maximum of 3 units LED Indicators - Green LED = On, Red LED = DC Output Low DC Good Relay (24V model only) - 0.3A rated normally open relay contacts, closes when output is above 17.6 - 19.4V (2) Operating Temperature C -40 to +71C (Derate linearly 2.5%/C from 61 to 71C) Storage Temperature C -40 to +85C Operating Humidity - 20 - 95% RH (non condensing) Cooling (1) - Convection Withstand Voltage - Input to Output 3kVAC for 1 min. Isolation Resistance - >100M at 25C & 70%RH, Output to Ground 500VDC Vibration (Operating) - IEC 60068-2-6 (Mounting by rail: Random wave, 10-500 Hz, 2G, ea. along X, Y, Z axes 10 min/cycle, 60 min) Shock (Operating) - IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 Faces, 3 times for each face) Safety Agency Approvals - UL508 Listed, IEC/UL/CSA/EN62368-1, 60950-1, CE Mark Conducted & Radiated EMI - EN55022 class B EN55022 class A Immunity - IEC 61000-4-2, -3, 4, -5, -6. -8, -11 Weight (Typ) g 920 1000 Size (LxWxH) mm 116.6 x 63.5 x 125mm 116 x 83 x 125mm Size (LxWxH) (1) in 4.59 x 2.5 x 4.92 4.57 x 3.27 x 4.92 Case material - Metal Warranty yrs Three years (1) Recommend 1 clearance on all sides *Safety certi ed for AC input only (2) DPP120 -35CDPP120-240 Series Outline Drawing (DPP120) Outline Drawing (DPP240) Model Selector Terminal Assignments Adjust. Output Over- Function Model Voltage Range Curr. voltage E . 1 DC Good relay DPP120-12-1 12V 11.4 - 14.5V 10A 15 - 17.4V 84% 2 DC Good relay DPP120-24-1 24V 22.5 - 28.5V 5A 30 - 34.8V 86% 3 +V DPP120-48-1 48V 45 - 55V 2.5A 60 - 69.6V 87% 4 +V DPP240-24-1 24V 22.5 - 28.5V 10A 30 - 34.8V 89% 5 -V DPP240-48-1 48V 47 - 56V 5A 60 - 69.6V 90% 6 -V 7 Chassis ground 8 L Other DIN Rail Products 9 N DPP 15W to 100W Snap-on Mounting: snap onto DIN Rail TS35/7.5 or TS35/15. (no tools required) DPP480 480W single and three phase DSP 10W to 100W low pro le Options DLP 75W to 240W single phase Su x Description For Additional Information, please visit Blank Non detachable connectors