DPP120-960 Series 120W, 240W, 480W & 960W 3 Phase DIN Rail Mount Power Supplies Features Low Cost 12V, 24V or 48V Outputs Wide Range 340 to 575VAC Input Parallel Function Switch (240 & 480W) Current Share (960W) (3) -40 to +71C Operation Key Market Segments & Applications Speci cations Model DPP120-xx-3 DPP240-xx-3 DPP480-xx-3 DPP960-xx-3 AC Input Voltage range (1) VAC 340 - 575VAC, three phase Input Frequency Hz 47 - 63Hz DC Input Voltage range VDC 480 - 820VDC* Inrush Current (380-480VAC) A 10A 20A 20A 30A Power Factor (2) - 0.55 0.55 0.65 0.8 Input Current (400VAC) (typ) A 0.36A 0.65A 1.1A 1.72A Output Voltage Accuracy % -0, +1% of Nominal Line Regulation % 1% Load Regulation % 1% 1% (5% when set in parallel mode) Ripple and Noise (20MHz BW) mV 100mV 100mV 100mV 80mV Overcurrent Protection (Typ) - 115 - 135% 120 - 140% 110 - 135% 110 - 130% Overvoltage Protection V See model selector Overtemperature Protection - Yes, auto recovery Hold Up Time (380-480VAC) ms > 20ms > 20ms > 20ms > 15ms Parallel operation (up to 90% load) - - Set in parallel (droop) mode - up to 2 units LED Indicators - Green LED = On, Red LED = DC Output Low DC Good Relay (24V models only) - 0.3A rated normally open relay contacts, closes when output is above 17.6 - 19.4V (3) Operating Temperature - -40 to +71C(Derate linearly 2.5%/C from 61 to 71C, 3.5%/C for DPP960) Storage Temperature - -40 to +85C Operating Humidity (non condensing) - 20 - 95% RH Cooling - Convection. Recommend 1 clearance on all sides Withstand Voltage - Input to Output 3kVAC, Input to Ground 1.5kVAC for 1 min. Isolation Resistance - >100M at 25C & 70%RH, Output to Ground 500VDC Vibration - IEC 60068-2-6. 10- 500Hz, 2G on X, Y & Z axes Shock - IEC 60068-2-27. Half sinewave, 4G, 22ms, 3 times each face Vibration (Operating) - IEC 60068-2-6 (Mounting by rail: Random wave, 10-500 Hz, 2G, ea. along X, Y, Z axes 10 min/cycle, 60 min) Shock (Operating) - IEC 60068-2-27 (Half sine wave, 4G, 22ms, 3 axes, 6 Faces, 3 times for each face) Safety Agency Approvals - UL508 Listed, UL60950-1, EN60950-1, CE Conducted & Radiated EMI - EN55022 class B Immunity - IEC 61000-4-2, -3, 4, -5, -6. -8, -11 Weight (Typ) g 800g 1100g 1720g 3400g Size (LxWxH) mm 112 x 74 x 124mm 112 x 89 x 124mm 112 x 150 x 124mm 112 x 275.8 x 126.2 Size (LxWxH) in 4.41 x 2.91 x 4.88 4.41 x 3.5 x 4.88 4.41 x 5.91 x 4.88 4.41 x 10.86 x4.97 Switching Frequency kHz 70kHz 25kHz 80kHz 52kHz MTBF (Bellcore Issue 6 40C, GB) Hours 527,000 488,000 411,000 352,000 Case material - Metal Warranty yrs Three years (1) Bi-phase input is permissible, but output load must be derated to 75% load *Safety certi ed for AC input only (2) Passive, meets EN61000-3-2 (3) DPP480 -30CDPP120-960 Series Model Selector Voltage Adjust Output Overvoltage E ciency Model (V) Range (V) Current (A) (V) (%) DPP120-12-3 12V 11.4 - 14.5V 10A 14.5 - 17.4V 87% DPP120-24-3 24V 22.5 - 28.5V 5A 30 - 33V 89% DPP240-24-3 24V 22.5 - 28.5V 10A 30 - 33V 90% DPP480-24-3 24V 22.5 - 28.5V 20A 30 - 33V 90% DPP960-24-3 24V 22.5 - 28.5V 40A 30 - 33V 92% DPP240-48-3 48V 47 - 56V 5A 60 - 68V 91% DPP480-48-3 48V 47 - 56V 10A 60 - 68V 91% DPP960-48-3 48V 47 - 56V 20A 60 - 68V 93% DPP120 Outline DPP240 Outline DPP480 Outline DPP960 Outline Snap-on Mounting: snap onto DIN Rail TS35/7.5 or TS35/15. (no tools required) Other DIN Rail Products DPP 15W to 480W For Additional Information, please visit DSP 10W to 100W low pro le