10598-30-9X TE Connectivity

SPECIFICATION CONTROL DRAWING 10598 Date 2-26-13 95 OHM, AWG 30, 7 STRANDS OF AWG 38, TRIAXIAL CABLE CHEMINAX Revision D THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. CHARACTERISTIC IMPEDANCE 95 5 ohms, Method B CAPACITANCE 13.5 pF/ft. (nominal) CONDUCTOR 14.6 pF/ft. (maximum) .0120 AWG 30, 7 Strands of VELOCITY OF PROPAGATION 80% (nominal) (nominal) AWG 38, Silver-Coated .013 High-Strength Copper (maximum) Alloy ADDITIONAL REQUIREMENTS DIELECTRIC .072 Rayfoam H ELECTRICAL (nominal) Color - White .074 CONDUCTOR RESISTANCE 116. ohms/1000 ft. (nominal) (maximum) INSULATION RESISTANCE 10,000 megohms (minimum) (CONDUCTOR TO SHIELD) for 1000 ft. st 1 SHIELD JACKET FLAWS .089 AWG 38, SPARK TEST 1.0 kV (rms) (nominal) Tin-Coated Copper IMPULSE TEST 6.0 kV (peak) .091 (maximum) VOLTAGE WITHSTAND CONDUCTOR TO SHIELD 1000 volts (rms) (minimum) st SHIELD TO SHIELD 500 volts (rms) (minimum) 1 JACKET .113 Modified FEP (nominal) Color - Clear ENVIRONMENTAL .119 (maximum) FLAMMABILITY Method B HEAT SHOCK 225C nd 2 SHIELD LOW TEMPERATURE-COLD BEND -55C/4.00 inch mandrel .130 AWG 38, VOLTAGE WITHSTAND 1000 volts (rms), 1 minute (nominal) Tin-Coated Copper (Post Environmental) .136 (maximum) PHYSICAL INSULATION (DIELECTRIC) ELONGATION 50% (minimum) 2 TENSILE STRENGTH 600 lbf/in (minimum) nd 2 JACKET JACKET (EACH) .146 Modified FEP ELONGATION 200% (minimum) (nominal) 2 TENSILE STRENGTH 2000 lbf/in (minimum) .153 st (maximum) 1 JACKET THICKNESS .012 inch (nominal) nd 2 JACKET THICKNESS .006 inch (minimum) .008 inch (nominal) SHIELD COVERAGE (EACH) 90% (minimum) Outer jacket color will be translucent white (designated by a -9X appended to the part number, e.g. 10598-30-9X) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. WEIGHT 21.1 lbs/1000 ft. (maximum) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayfoam, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS 501 Oakside Avenue REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE Redwood City, California 94063-3800 ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 1-800-227-8816 Fax: 1-650-361-6297 2013 Tyco Electronics Corporation, All rights reserved.