SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. TOP SEAL: Low outgassing thermoplastic, color-blue.
3. MULTI-CONDUCTOR SEAL: Low outgassing thermoplastic, color-natural.
4. CRIMP SPLICE: Base Metal: Copper Alloy 102 per ASTM B-75.
Plating: Tin per MIL-T-10727, Type 1.
Dimensions:
Part Name Prod. A B Color Code CMA
Rev. Range
D-436-0125 C 2.67 (0.105) 1.75 (0.069) Blue 779 - 2680
2.56 (0.101) 1.65 (0.065)
D-436-0126 C 3.89 (0.153) 2.59 (0.102) Yellow 1900 - 6755
3.73 (0.147) 2.46 (0.097)
APPLICATION
1. These parts are designed to make an immersion resistant stub splice in wires having insulations rated for at least 135C.
2. Wire Accomodation:
Jacket O.D.: 1.32 (0.052) max
D-436-0125 D-436-0126
Gauge (AWG) CMA Number Gauge (AWG) CMA Number
20 1216 * 20 1216 *
22 754 2 - 3 22 754 3 - 7
24 475 2 - 5 24 475 4 - 7
26 304 3 - 7 26 304 **
* Use D-436-0127, ** Use D-436-0125
3. Parts will meet performance requirements of MIL-S-81824/1.
TITLE: ( 7at 1.35 (0.053)
THERMOFIT
STUB SPLICE SEALING SYSTEM,
DEVICES
300 Constitution Drive
20/16 SPLICE (D-436-0125), 16/12 SPLICE (D-436-0126),
Menlo Park, CA 94025, USA
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
DOCUMENT NO.: D-436-0125/-0126
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES: ANGLES: N/A Raychem reserves the right to amend DCR NUMBER: REPLACES:
0.00 N/A this drawing at any time. Users should
D001278 N/A
0.0 N/A ROUGHNESS IN evaluate the suitability of the product for
0 N/A MICRON their application.
DRAWN BY: DATE: PROD. REV. DOC ISSUE: SCALE: SIZE: SHEET:
M. FORONDA 14-Nov.-00 SEE TABLE 1 None A 1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.