1194901-9
SolderSleeve Shield Terminators, SolderSleeve Shield Terminator Operating
Temperature (Max) 150 C
1194901-9 ACTIVE
Raychem
TE Internal #: 620269-000
SolderSleeve Shield Terminators, SolderSleeve Shield Terminator
Operating Temperature (Max) 150 C
View on TE.com>
Harnessing > Interconnect Devices > SolderSleeve Shield Terminators
SolderSleeve Shield Terminator Operating Temperature (Max): 150 C
SolderSleeve Shield Terminator Expanded Inside Diameter (Min): 13.59 mm [ .535 in ]
SolderSleeve Shield Terminator Recovered Inside Diameter (Max): 8.89 mm [ .35 in ]
Pre-Installed Lead: No
Wire Temperature (Max): 125 C
Features
Configuration Features
Pre-Installed Lead No
Dimensions
SolderSleeve Shield Terminator Expanded Inside Diameter (Min) 13.59 mm[.535 in]
SolderSleeve Shield Terminator Recovered Inside Diameter (Max) 8.89 mm[.35 in]
Usage Conditions
SolderSleeve Shield Terminator Operating Temperature (Max) 150 C
Wire Temperature (Max) 125 C
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU Not Compliant
EU ELV Directive 2000/53/EC Not Compliant
China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JUN 2020
(209)
Candidate List Declared Against: JUN 2020
(209)
SVHC > Threshold:
Pb (37% in Solder)
Article Safe Usage Statements:
Do not eat, drink or smoke when using this product. Wash thoroughly after
handling. Recycle if possible and dispose of the article by following all applicable
governmental regulations relevant to your geographic location.
Halogen Content BFR/CFR/PVC Free, but Br/Cl >900 ppm in
01/31/2021 06:07PM | Page1
For support call+1 800 522 6752
1194901-9
SolderSleeve Shield Terminators, SolderSleeve Shield Terminator Operating
Temperature (Max) 150 C
Halogen Content BFR/CFR/PVC Free, but Br/Cl >900 ppm in
other sources.
Solder Process Capability Not applicable for solder process capability
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides
on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on
requirements for substances in articles posted at this URL: