1393030-8 TE Connectivity

Catalog 1308242 Issued 3-03 P&B SSRQ series Quad AC Output Hockey Puck Solid State Relay With Triac Outputs File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data Form: 4 Form A (4 SPST-NO). Four independent AC output solid state relays in one standard package. 20A rms triac outputs. Duty: Continuous. Isolation: 2500V rms input-to-output-to-ground. 4-15 VDC input control. Zero voltage and random voltage turn-on versions. Capacitance: 10.0 pf maximum (input to output). Temperature Range: 2500V rms optical isolation. Quick connect style terminals. Storage: 40C to +125C Operating: 40C to + 80C Case Material: Plastic, UL rated 94V-0. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSRQ -240 D 20 1. Basic Series: SSRQ = Quad output SSR - 4 SPST - NO 2. Line Voltage: 240 = 24 - 280 VAC 3. Input Type & Voltage: D = 4 - 15VDC, zero voltage turn-on types. R = 4 - 15VDC, random voltage turn-on types. 4. Maximum Switching Rating/Output: 20 = .05 - 20A rms, mounted to heatsink. NOTE: 60A max. per package. 5. Options: Blank = Zero voltage turn-on (all sections) Requires input type above. R = Random voltage turn-on (all sections) Requires input type above. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRQ-240D20 Input Specifications Parameter Conditions Units Zero V or Random V Turn-on Units Control Voltage Range V 4-15 IN @ 25C VDC Must Operate Voltage V (Min.) VDC 4 @ 25C IN(OP) Must Release Voltage V (Min.) @ 25C VDC 1 IN(REL) Input Current (Typ.) mA DC 12 @ 25C Input Impedance (Nom.) ohms 330 @ 25C Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1108 specified. Refer to inside back cover.0.25C/W 0.5C/W 1C/W 2C/W 3C/W Catalog 1308242 Issued 3-03 P&B Output Specifications (@ 25 C, unless otherwise specified) Parameter Conditions Units Load Voltage Range V L V rms 24-280 Repetitive Blocking Voltage (Min.) 600 V peak - Load Current Range I * Resistive A rms .15-20 L Single Cycle Surge Current (Min.) A peak 250 Leakage Current (Off-State) (Max.) f = 60 Hz. V = 280Vrms mA rms 10 L On-State Voltage Drop (Max.) I = Max. 1.6 V peak L Static dv/dt (Off-State) (Min.) V = 280Vrms 200 V/ s L Thermal Resistance, Junction to Case (R ) (Max.) All Sections On C/W 1.2 J-C Turn-On Time (Max.) f = 60 Hz. ms 8.3 for Zero Voltage Turn-On Models 0.1 for Random Voltage Turn-On Models Turn-Off Time (Max.) f = 60 Hz. ms 8.3 2 2 t = 8.3 ms A Sec. 260 I t Rating Load Power Factor Rating 0.5 - 1.0 I = Max. L *See Thermal Derating Curves. Note: While each output section is rated for a maximum of 20A, the maximum output per package is 60A. Electrical Characteristics (Thermal Derating Curves) How To Use These Curves Knowing maximum load current and maximum ambient temperature, use derating curves to determine required heat sink and maximum allowable base plate temperature. On left hand power dissipation curve, locate the point corresponding to maximum load current. Extend a line to the right from that point to the intersection of vertical line on right hand chart corresponding to maximum ambient temperature. From heat sink curve, read directly or extrapolate required heat sink size. Extend the line farther to the right and read on the right hand scale the maximum allowable base plate temperature. Example #1: Given: I = Four 7.5A loads @ 60C L 75 Find: Minimum heatsink required Solution: From Thermal Dissipation Graph 80 4 x 7.5A = 30A 4 sections ON Heatsink = 2C/W minimum 60 90 Example #2: 40 Given: SSRQ24020 Find: Maximum rating mounting to 1.0C/W HS @ 60C All 20 105 sections ON Solution: From Thermal Dissipation Graph Rating mounted to 1.0C/W HS @ 60C = 36A total 0 15 30 45 60 0 20 40 60 80 9A for 4 Sections ON = 36A total Loads Current (A rms) Ambient Temp. (C) 12A for 3 Sections ON = 36A total Operating Diagram Heatsink Recommendations B1 A1 We recommend that solid state relay modules be ZERO ZERO mounted to a heatsink sufficient to maintain the VOLTAGE OUTPUT B VOLTAGE OUTPUT A modules base temperature at less than 85C under CIRCUIT CIRCUIT worst case ambient temperature and load conditions. B2 A2 -(B) -(A) The heatsink mounting surface should be a smooth -(D) -(C) + (30-40 micro-inch finish), flat (30-40 micro-inch D1 C1 COMMON ZERO ZERO flatness across mating area), un-painted surface which VOLTAGE VOLTAGE is clean and free of oxidation. OUTPUT D OUTPUT C CIRCUIT CIRCUIT An even coating of thermal compound (Dow Corning D2 C2 EQUIVALENT CIRCUIT ONLY DC340 or equivalent) should be applied to both the Random Turn-On Units Have A Random Turn-On Circuit Instead Of A Zero Voltage Circuit heatsink and module mounting surfaces and spread to a uniform depth of .002 to eliminate all air pockets. The module should be mounted to the heatsink using two #10 screws. Outline Dimensions MTNG HOLE / SLOT 2 PLCS. .170 (4.3) DIA. Input Terminals mate with the following 1.125 connectors or equivalent: A1 A2 C1 C2 A1 (28.57) 1.87 DC SEC. C AMP P/N: 103976-4 (47.5) DC SEC. A + DC COMM Consult your local distributor for connectors. DC SEC. B 2.3 DC SEC. D (58.4) .025 (.635) SQ. PINS B1 B2 D1 D2 ON .100 (2.54) CENTERS .250 (6.35) Q.C. TERMS .375 .85 1.75 8 PLACES (9.5) (21.6) (44.45) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1109 specified. Refer to inside back cover. Power Dissipation (Watts) Max. Allowable Base Temperature (C) +